[PATCH v3 02/12] dt-bindings: misc: Add bindings for HiSilicon usb hub and data role switch functionality on HiKey960
From: Yu Chen <chenyu56@huawei.com>
Date: 2019-03-02 09:06:28
Also in:
linux-usb, lkml
Subsystem:
open firmware and flattened device tree bindings, the rest · Maintainers:
Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds
This patch adds binding documentation to support usb hub and usb data role switch of Hisilicon HiKey960 Board. Cc: Sergei Shtylyov <redacted> Cc: Rob Herring <robh+dt@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: John Stultz <redacted> Cc: Binghui Wang <wangbinghui@hisilicon.com> Signed-off-by: Yu Chen <chenyu56@huawei.com> --- v1: * Fix some format errors as suggested by Sergei. * Modify gpio description to use gpiod API. v2: * Remove information about Hikey. * Fix gpio description. * Remove device_type of endpoint. v3: * Remove property typec-vbus-enable-val. * Add description of pinctrl-names. * Add example for "hisilicon,gpio-hubv1" * Add flag in gpiod properties. --- --- .../bindings/misc/hisilicon-hikey-usb.txt | 52 ++++++++++++++++++++++ 1 file changed, 52 insertions(+) create mode 100644 Documentation/devicetree/bindings/misc/hisilicon-hikey-usb.txt
diff --git a/Documentation/devicetree/bindings/misc/hisilicon-hikey-usb.txt b/Documentation/devicetree/bindings/misc/hisilicon-hikey-usb.txt
new file mode 100644
index 000000000000..422e844df719
--- /dev/null
+++ b/Documentation/devicetree/bindings/misc/hisilicon-hikey-usb.txt@@ -0,0 +1,52 @@ +Support usb hub and usb data role switch of Hisilicon HiKey960 Board. + +----------------------------- + +Required properties: +- compatible: "hisilicon,gpio-hubv1","hisilicon,hikey960-usb" +- typec-vbus-gpios: gpio to control the vbus of typeC port +- otg-switch-gpios: gpio to switch DP & DM between the hub and typeC port +- hub-vdd33-en-gpios: gpio to enable the power of hub +- pinctrl-names: pin configuration state name ("default") +- pinctrl-0: pinctrl config + +Example +----- + + hisi_hikey_usb: hisi_hikey_usb { + compatible = "hisilicon,hikey960-usb"; + typec-vbus-gpios = <&gpio25 2 GPIO_ACTIVE_HIGH>; + otg-switch-gpios = <&gpio25 6 GPIO_ACTIVE_HIGH>; + hub-vdd33-en-gpios = <&gpio5 6 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&usbhub5734_pmx_func>; + + port { + #address-cells = <1>; + #size-cells = <0>; + + hikey_usb_ep: endpoint@0 { + reg = <0>; + remote-endpoint = <&dwc3_role_switch_notify>; + }; + }; + }; + + hisi_hikey_usb: hisi_hikey_usb { + compatible = "hisilicon,gpio-hubv1"; + typec-vbus-gpios = <&gpio25 2 GPIO_ACTIVE_LOW>; + otg-switch-gpios = <&gpio25 6 GPIO_ACTIVE_HIGH>; + hub-vdd33-en-gpios = <&gpio5 6 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&usbhub5734_pmx_func>; + + port { + #address-cells = <1>; + #size-cells = <0>; + + hikey_usb_ep: endpoint@0 { + reg = <0>; + remote-endpoint = <&dwc3_role_switch_notify>; + }; + }; + };
--
2.15.0-rc2