Re: [RFC PATCH 1/5] mtd: cfi_cmdset_0002: Add support for polling status register

From
Sergei Shtylyov <hidden>
Date
2019-02-23 18:41:13
Also in
linux-arm-kernel, lkml
Reply to
Vignesh R, 2019-02-19
Hello!

On 02/19/2019 09:36 AM, Vignesh R (by way of Boris Brezillon [off-list ref]) wrote:
quoted hunk ↗ jump to hunk
HyperFlash devices are compliant with CFI AMD/Fujitsu Extended Command
Set(0x0002) for flash operations, therefore drivers/mtd/chips/cfi_cmdset_0002.c
can be use as is. But these devices do not support DQ polling method of
determining chip ready/good status. These flashes provide Status
Register whose bits can be polled to know status of flash operation.

Cypress HyperFlash datasheet here[1], talks about CFI Amd/Fujitsu
Extended Query version 1.5. Bit 0 of "Software Features supported" field
of CFI Primary Vendor-Specific Extended Query table indicates
presence/absence of status register and Bit 1 indicates whether or not
DQ polling is supported. Using these bits, its possible to determine
whether flash supports DQ polling or need to use Status Register.

Add support for polling status register to know device ready/status of
erase/write operations when DQ polling is not supported.

[1] https://www.cypress.com/file/213346/download

Signed-off-by: Vignesh R <vigneshr@ti.com>
---

Note: PRI extended query table size is bigger on 1.5 than on older
revision. Not sure if this causes problems on older rev. because of
reading beyond current size.

 drivers/mtd/chips/cfi_cmdset_0002.c | 50 +++++++++++++++++++++++++++++
 include/linux/mtd/cfi.h             |  5 +++
 2 files changed, 55 insertions(+)
diff --git a/drivers/mtd/chips/cfi_cmdset_0002.c b/drivers/mtd/chips/cfi_cmdset_0002.c
index 72428b6bfc47..7a4ef0237750 100644
--- a/drivers/mtd/chips/cfi_cmdset_0002.c
+++ b/drivers/mtd/chips/cfi_cmdset_0002.c
[...]
quoted hunk ↗ jump to hunk
@@ -97,6 +105,18 @@ static struct mtd_chip_driver cfi_amdstd_chipdrv = {
 	.module		= THIS_MODULE
 };
 
+/*
+ * Use status register to poll for Erase/write completion when DQ is not
+ * supported. This is indicated by Bit[1:0] of SoftwareFeatures field in
+ * CFI Primary Vendor-Specific Extended Query table 1.5
+ */
+static int cfi_use_status_reg(struct cfi_private *cfi)
+{
+	struct cfi_pri_amdstd *extp = cfi->cmdset_priv;
+
+	return (extp->MinorVersion >= '5') &&
+		((extp->SoftwareFeatures & 0x11) == 1);
   Parens not necessary here.

[...]
quoted hunk ↗ jump to hunk
@@ -744,8 +764,21 @@ static struct mtd_info *cfi_amdstd_setup(struct mtd_info *mtd)
  */
 static int __xipram chip_ready(struct map_info *map, unsigned long addr)
 {
+	struct cfi_private *cfi = map->fldrv_priv;
 	map_word d, t;
 
+	if (cfi_use_status_reg(cfi)) {
+		/*
+		 * For chips that support status register, check device
+		 * ready bit
+		 */
+		cfi_send_gen_cmd(0x70, cfi->addr_unlock1, 0, map, cfi,
+				 cfi->device_type, NULL);
+		d = map_read(map, addr);
+
+		return (d.x[0] & CFI_SR_DRB);
   Again, parens not needed.

[...]

   Other than that, looks good.

MBR, Sergei
Thread (25 messages) 25 messages, 4 authors, last reply 2019-02-27
Keyboard shortcuts
hback out one level
jnext message in thread / next series-diff position
kprevious message in thread / previous series-diff position
ldrill in
Escclose help / fold thread tree
?toggle this help