[PATCH 1/6] dt-bindings: soc: qcom: Add interconnect binding for GENI QUP
From: Alok Chauhan <hidden>
Date: 2019-01-22 06:34:14
Also in:
linux-arm-msm, linux-i2c, linux-serial, linux-spi, lkml
Subsystem:
arm/qualcomm mailing list, arm/qualcomm support, open firmware and flattened device tree bindings, the rest · Maintainers:
Bjorn Andersson, Konrad Dybcio, Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds
Add documentation for the interconnect and interconnect-names bindings for the GENI QUP as detailed by bindings/interconnect/interconnect.txt. Signed-off-by: Alok Chauhan <redacted> --- Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.txt | 10 ++++++++++ 1 file changed, 10 insertions(+)
diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.txt b/Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.txt
index dab7ca9..44d7e02 100644
--- a/Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.txt
+++ b/Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.txt@@ -17,6 +17,12 @@ Required properties if child node exists: - #address-cells: Must be <1> for Serial Engine Address - #size-cells: Must be <1> for Serial Engine Address Size - ranges: Must be present +- interconnects: phandle to a interconnect provider. Please refer + ../interconnect/interconnect.txt for details. + Must be 2 paths corresponding to 2 AXI ports. +- interconnect-names: Port names to differentiate between the + 2 interconnect paths defined with interconnect + specifier. Properties for children:
@@ -67,6 +73,10 @@ Example: #size-cells = <1>; ranges; + interconnects = <&qnoc 11 &qnoc 512>, + <&qnoc 0 &qnoc 543>; + interconnect-names = "qup-memory", "qup-config"; + i2c0: i2c@a94000 { compatible = "qcom,geni-i2c"; reg = <0xa94000 0x4000>;
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project