[PATCH v5 09/14] ARM: dts: qcom: pma8084: add interrupt controller properties
From: Brian Masney <hidden>
Date: 2019-01-17 00:33:25
Also in:
linux-arm-msm, linux-gpio, lkml
Subsystem:
the rest · Maintainer:
Linus Torvalds
Add interrupt controller properties now that spmi-gpio is a proper hierarchical IRQ chip. The interrupts property is no longer needed so remove it. This change was not tested on any hardware but the same change was tested on qcom-pm8941.dtsi using a LG Nexus 5 (hammerhead) phone with no issues. Signed-off-by: Brian Masney <redacted> Reviewed-by: Stephen Boyd <sboyd@kernel.org> Reviewed-by: Bjorn Andersson <redacted> --- Changes since v4: - None Chances since v3: - None arch/arm/boot/dts/qcom-pma8084.dtsi | 24 ++---------------------- 1 file changed, 2 insertions(+), 22 deletions(-)
diff --git a/arch/arm/boot/dts/qcom-pma8084.dtsi b/arch/arm/boot/dts/qcom-pma8084.dtsi
index aac7e73b6872..8f5ea7add20f 100644
--- a/arch/arm/boot/dts/qcom-pma8084.dtsi
+++ b/arch/arm/boot/dts/qcom-pma8084.dtsi@@ -32,28 +32,8 @@ reg = <0xc000>; gpio-controller; #gpio-cells = <2>; - interrupts = <0 0xc0 0 IRQ_TYPE_NONE>, - <0 0xc1 0 IRQ_TYPE_NONE>, - <0 0xc2 0 IRQ_TYPE_NONE>, - <0 0xc3 0 IRQ_TYPE_NONE>, - <0 0xc4 0 IRQ_TYPE_NONE>, - <0 0xc5 0 IRQ_TYPE_NONE>, - <0 0xc6 0 IRQ_TYPE_NONE>, - <0 0xc7 0 IRQ_TYPE_NONE>, - <0 0xc8 0 IRQ_TYPE_NONE>, - <0 0xc9 0 IRQ_TYPE_NONE>, - <0 0xca 0 IRQ_TYPE_NONE>, - <0 0xcb 0 IRQ_TYPE_NONE>, - <0 0xcc 0 IRQ_TYPE_NONE>, - <0 0xcd 0 IRQ_TYPE_NONE>, - <0 0xce 0 IRQ_TYPE_NONE>, - <0 0xcf 0 IRQ_TYPE_NONE>, - <0 0xd0 0 IRQ_TYPE_NONE>, - <0 0xd1 0 IRQ_TYPE_NONE>, - <0 0xd2 0 IRQ_TYPE_NONE>, - <0 0xd3 0 IRQ_TYPE_NONE>, - <0 0xd4 0 IRQ_TYPE_NONE>, - <0 0xd5 0 IRQ_TYPE_NONE>; + interrupt-controller; + #interrupt-cells = <2>; }; pma8084_mpps: mpps@a000 {
--
2.17.2