Re: [PATCH v2] arm64: dts: renesas: r8a77980: add thermal support
From: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Date: 2018-10-10 22:11:42
Also in:
linux-renesas-soc
Hi Sergei, Thanks for keep working on this patch. On 2018-10-10 22:18:11 +0300, Sergei Shtylyov wrote:
quoted hunk ↗ jump to hunk
Describe THS/CIVM in the R8A77980 device trees. Signed-off-by: Sergei Shtylyov <redacted> --- This patch is against the 'renesas-devel-20181008-v4.19-rc7' tag of Simon Horman's 'renesas.git' repo. Changes in version 2: - renamed the thermal device node label; - renamed the thermal zone nodes; - added the passive trip point in the 1st thermal zone and the passive and critical trip points in the 2nd thermal zone; - changed the "hysteresis" prop in the critical trip point; - removed the empty "cooling-maps" node from the 1st thermal zone. arch/arm64/boot/dts/renesas/r8a77980.dtsi | 53 ++++++++++++++++++++++++++++++ 1 file changed, 53 insertions(+) Index: renesas/arch/arm64/boot/dts/renesas/r8a77980.dtsi ===================================================================--- renesas.orig/arch/arm64/boot/dts/renesas/r8a77980.dtsi +++ renesas/arch/arm64/boot/dts/renesas/r8a77980.dtsi@@ -330,6 +330,19 @@ #power-domain-cells = <1>; }; + tsc: thermal@e6198000 { + compatible = "renesas,r8a77980-thermal"; + reg = <0 0xe6198000 0 0x100>, + <0 0xe61a0000 0 0x100>; + interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 522>; + power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; + resets = <&cpg 522>; + #thermal-sensor-cells = <1>;
The status property is missing but as you told me in v1 it should not matter. I will leave it for Simon to decide if he wants it to keep it consistent with other SoC or if we should remove it from the other dtsi files. In any case with or without the status property. Reviewed-by: Niklas S�derlund <niklas.soderlund+renesas@ragnatech.se>
quoted hunk ↗ jump to hunk
+ }; + intc_ex: interrupt-controller@e61c0000 { compatible = "renesas,intc-ex-r8a77980", "renesas,irqc"; #interrupt-cells = <2>;@@ -1404,6 +1417,46 @@ }; }; + thermal-zones { + thermal-sensor-1 { + polling-delay-passive = <250>; + polling-delay = <1000>; + thermal-sensors = <&tsc 0>; + + trips { + sensor1-passive { + temperature = <95000>; + hysteresis = <1000>; + type = "passive"; + }; + sensor1-critical { + temperature = <120000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + thermal-sensor-2 { + polling-delay-passive = <250>; + polling-delay = <1000>; + thermal-sensors = <&tsc 1>; + + trips { + sensor2-passive { + temperature = <95000>; + hysteresis = <1000>; + type = "passive"; + }; + sensor2-critical { + temperature = <120000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + }; + timer { compatible = "arm,armv8-timer"; interrupts-extended = <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) |
-- Regards, Niklas S�derlund