Thread (74 messages) 74 messages, 4 authors, 2018-11-02

Re: [PATCH] arm64: dts: renesas: r8a779{7|8}0: add TPU support

From: Simon Horman <horms@verge.net.au>
Date: 2018-09-21 07:35:02
Also in: linux-renesas-soc

On Wed, Sep 19, 2018 at 11:21:49PM +0300, Sergei Shtylyov wrote:
On 09/19/2018 11:02 PM, Sergei Shtylyov wrote:
quoted
Describe TPU in the R8A779{7|8}0 device trees.

Based on the original (and large) patches by Vladimir Barinov.

Signed-off-by: Vladimir Barinov <redacted>
Signed-off-by: Sergei Shtylyov <redacted>

---
This patch is against the 'renesas-devel-20180919-v4.19-rc4' branch of
Simon Horman's 'renesas.git' repo.

 arch/arm64/boot/dts/renesas/r8a77970.dtsi |    8 ++++++++
 arch/arm64/boot/dts/renesas/r8a77980.dtsi |    9 +++++++++
 2 files changed, 17 insertions(+)

Index: renesas/arch/arm64/boot/dts/renesas/r8a77970.dtsi
===================================================================
--- renesas.orig/arch/arm64/boot/dts/renesas/r8a77970.dtsi
+++ renesas/arch/arm64/boot/dts/renesas/r8a77970.dtsi
@@ -614,6 +614,14 @@
 			status = "disabled";
 		};
 
+		tpu: pwm@e6e80000 {
+			compatible = "renesas,tpu-r8a77970", "renesas,tpu";
  Oops, forgot to document the SoC specific binding...
I'm still not seeing the binding in my inbox.
Could you post it or point me to a link to it?
quoted
+			reg = <0 0xe6e80000 0 0x100>;
This register range seems a little small.
From my reading of the documentation 0x148 would be a more obvious choice.
Is the driver only accessing registers in in the 0x100 range for some
reason?
quoted
+			clocks = <&cpg CPG_MOD 304>;
+			power-domains = <&sysc R8A77970_PD_ALWAYS_ON>;
+			#pwm-cells = <4>;
+			status = "disabled";
+		};
 
 		vin0: video@e6ef0000 {
 			compatible = "renesas,vin-r8a77970";
Index: renesas/arch/arm64/boot/dts/renesas/r8a77980.dtsi
===================================================================
--- renesas.orig/arch/arm64/boot/dts/renesas/r8a77980.dtsi
+++ renesas/arch/arm64/boot/dts/renesas/r8a77980.dtsi
@@ -666,6 +666,15 @@
 			status = "disabled";
 		};
 
+		tpu: pwm@e6e80000 {
+			compatible = "renesas,tpu-r8a7798", "renesas,tpu";
   Same here. Plus forgot a zero at the end. :-/
quoted
+			reg = <0 0xe6e80000 0 0x100>;
+			clocks = <&cpg CPG_MOD 304>;
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+			#pwm-cells = <4>;
+			status = "disabled";
+		};
+
 		vin0: video@e6ef0000 {
 			compatible = "renesas,vin-r8a77980";
 			reg = <0 0xe6ef0000 0 0x1000>;
MBR, Sergei
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help