[PATCH v2 15/15] arm64: dts: allwinner: bananapi-m64: Bananapi S070WV20-CT16 DSI panel
From: Jagan Teki <hidden>
Date: 2018-10-23 15:52:26
Also in:
dri-devel, linux-arm-kernel, linux-clk, lkml
Subsystem:
arm/allwinner sunxi soc support, the rest · Maintainers:
Chen-Yu Tsai, Jernej Skrabec, Samuel Holland, Linus Torvalds
This patch add support for Bananapi S070WV20-CT16 DSI panel to BPI-M64 board. DSI panel connected via board DSI port with, - DC1SW as AVDD supply - DCDC1 as DVDD supply - PD6 gpio for reset pin - PD5 gpio for backlight enable pin - PD7 gpio for backlight vdd supply Signed-off-by: Jagan Teki <jagan-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org> --- Changes for v2: - Use quadratic rule on pwm brightness .../dts/allwinner/sun50i-a64-bananapi-m64.dts | 42 +++++++++++++++++++ 1 file changed, 42 insertions(+)
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts
index ef1c90401bb2..e0c6d1870a94 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts@@ -45,6 +45,7 @@ #include "sun50i-a64.dtsi" #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/pwm/pwm.h> / { model = "BananaPi-M64";
@@ -56,6 +57,24 @@ serial1 = &uart1; }; + vdd_bl: regulator@0 { + compatible = "regulator-fixed"; + regulator-name = "bl-3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&pio 3 7 GPIO_ACTIVE_HIGH>; /* PD7 */ + enable-active-high; + }; + + backlight_dsi: backlight-dsi { + compatible = "pwm-backlight"; + pwms = <&r_pwm 0 50000 PWM_POLARITY_INVERTED>; + brightness-levels = <1 2 4 8 16 32 64 128 512>; + default-brightness-level = <2>; + enable-gpios = <&pio 3 5 GPIO_ACTIVE_HIGH>; /* PD5 */ + power-supply = <&vdd_bl>; + }; + chosen { stdout-path = "serial0:115200n8"; };
@@ -101,6 +120,23 @@ status = "okay"; }; +&dphy { + status = "okay"; +}; + +&dsi { + status = "okay"; + + panel@0 { + compatible = "bananapi,s070wv20-ct16-icn6211"; + reg = <0>; + avdd-supply = <®_dc1sw>; + dvdd-supply = <®_dldo1>; + reset-gpios = <&pio 3 6 GPIO_ACTIVE_HIGH>; /* PD6 */ + backlight = <&backlight_dsi>; + }; +}; + &ehci0 { status = "okay"; };
@@ -193,6 +229,12 @@ status = "okay"; }; +&r_pwm { + pinctrl-names = "default"; + pinctrl-0 = <&r_pwm_pin>; + status = "okay"; +}; + &r_rsb { status = "okay";
--
2.18.0.321.gffc6fa0e3