[PATCH v3 2/4] dt-bindings: soc: Document "brcm,bcm2836-vchiq"
flat view
STALE2899d
REVIEWED: 1 (0M)
From: Phil Elwell <hidden>
Date: 2018-09-17 08:22:22
Also in:
linux-arm-kernel
Subsystem:
open firmware and flattened device tree bindings, the rest · Maintainers:
Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds
Revision v3 of 3 in this series; 1 review trailer.
Revisions (3)
- v1 [diff vs current]
- v2 [diff vs current]
- v3 current
"brcm,bcm2836-vchiq" should be used on BCM2836 and BCM2837 to ensure correct operation. Signed-off-by: Phil Elwell <redacted> Acked-by: Stefan Wahren <redacted> --- Documentation/devicetree/bindings/soc/bcm/brcm,bcm2835-vchiq.txt | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/Documentation/devicetree/bindings/soc/bcm/brcm,bcm2835-vchiq.txt b/Documentation/devicetree/bindings/soc/bcm/brcm,bcm2835-vchiq.txt
index 8dd7b3a..f331316 100644
--- a/Documentation/devicetree/bindings/soc/bcm/brcm,bcm2835-vchiq.txt
+++ b/Documentation/devicetree/bindings/soc/bcm/brcm,bcm2835-vchiq.txt@@ -2,7 +2,8 @@ Broadcom VCHIQ firmware services Required properties: -- compatible: Should be "brcm,bcm2835-vchiq" +- compatible: Should be "brcm,bcm2835-vchiq" on BCM2835, otherwise + "brcm,bcm2836-vchiq". - reg: Physical base address and length of the doorbell register pair - interrupts: The interrupt number See bindings/interrupt-controller/brcm,bcm2835-armctrl-ic.txt
--
2.7.4