Re: [PATCH v2] clk: renesas: cpg-mssr: Add R7S9210 support
From: Rob Herring <robh@kernel.org>
Date: 2018-08-29 00:52:28
Also in:
linux-clk, linux-renesas-soc
On Mon, Aug 27, 2018 at 11:21:39AM -0500, Chris Brandt wrote:
Add support for the R7S9210 (RZ/A2) Clock Pulse Generator and Module Standby. The Module Standby HW in the RZ/A series is very close to R-Car HW, except for how the registers are laid out. The MSTP registers are only 8-bits wide, there is no status registers (MSTPST), and the register offsets are a little different. Since the RZ/A hardware manuals refer to these registers as the Standby Control Registers, we'll use that name to distinguish the RZ/A type for the R-Car type. Signed-off-by: Chris Brandt <chris.brandt@renesas.com> ---
quoted hunk ↗ jump to hunk
+++ b/drivers/clk/renesas/r7s9210-cpg-mssr.c@@ -0,0 +1,192 @@ +// SPDX-License-Identifier: GPL-2.0+ +/*
quoted hunk ↗ jump to hunk
+++ b/include/dt-bindings/clock/r7s9210-cpg-mssr.h@@ -0,0 +1,21 @@ +/* SPDX-License-Identifier: GPL-2.0+
The proper identifier is GPL-2.0-or-later