Hi Rob,

On Wed, Aug 29, 2018 at 2:52 AM Rob Herring [off-list ref] wrote:

On Mon, Aug 27, 2018 at 11:21:39AM -0500, Chris Brandt wrote:

quoted

Add support for the R7S9210 (RZ/A2) Clock Pulse Generator and Module
Standby.

The Module Standby HW in the RZ/A series is very close to R-Car HW, except
for how the registers are laid out.
The MSTP registers are only 8-bits wide, there is no status registers
(MSTPST), and the register offsets are a little different. Since the RZ/A
hardware manuals refer to these registers as the Standby Control Registers,
we'll use that name to distinguish the RZ/A type for the R-Car type.

Signed-off-by: Chris Brandt <chris.brandt@renesas.com>
---

quoted

+++ b/drivers/clk/renesas/r7s9210-cpg-mssr.c

@@ -0,0 +1,192 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*

quoted

+++ b/include/dt-bindings/clock/r7s9210-cpg-mssr.h

@@ -0,0 +1,21 @@
+/* SPDX-License-Identifier: GPL-2.0+

The proper identifier is GPL-2.0-or-later

Documentation/process/license-rules.rst disagrees.

Gr{oetje,eeting}s,

                        Geert

-- 
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds