Hi Hans,
On Thu 02 Aug 2018 at 13:37, Hans Verkuil wrote:

Hi Rui,

On 05/22/18 16:52, Rui Miguel Silva wrote:

quoted

Hi,
This series introduces the Media driver to work with the i.MX7 
SoC. it uses the
already existing imx media core drivers but since the i.MX7, 
contrary to
i.MX5/6, do not have an IPU and because of that some changes in 
the imx media
core are made along this series to make it support that case.

This patches adds CSI and MIPI-CSI2 drivers for i.MX7, along 
with several
configurations changes for this to work as a capture subsystem. 
Some bugs are
also fixed along the line. And necessary documentation.

For a more detailed view of the capture paths, pads links in 
the i.MX7 please
take a look at the documentation in PATCH 14.

The system used to test and develop this was the Warp7 board 
with an OV2680
sensor, which output format is 10-bit bayer. So, only MIPI 
interface was
tested, a scenario with an parallel input would nice to have.

*Important note*, this code depends on Steve Longerbeam series 
[0]:
[PATCH v4 00/13] media: imx: Switch to subdev notifiers
which the merging status is not clear to me, but the changes in 
there make
senses to this series

Bellow goes an example of the output of the pads and links and 
the output of
v4l2-compliance testing.

The v4l-utils version used is:
v4l2-compliance SHA   : 
47d43b130dc6e9e0edc900759fb37649208371e4 from Apr 4th.

The Media Driver fail some tests but this failures are coming 
from code out of
scope of this series (video-mux, imx-capture), and some from 
the sensor OV2680
but that I think not related with the sensor driver but with 
the testing and
core.

The csi and mipi-csi entities pass all compliance tests.

Cheers,
    Rui

[0]: 
https://www.mail-archive.com/linux-media@vger.kernel.org/msg131186.html

This patch series was delayed quite a bit since the patch series 
above
it depends on is still not merged.

But the v6 version of that series will be merged once the 4.20 
cycle opens:
https://www.mail-archive.com/linux-media@vger.kernel.org/msg133391.html

Good news.

Sakari has a branch with that series on top of the latest 
media_tree master:
https://git.linuxtv.org/sailus/media_tree.git/log/?h=v4l2-fwnode

Can you rebase this imx7 series on top of that? And test it 
again with the
*latest* v4l2-compliance? (I've added new checks recently, so 
you need to
update this utility)

Please post the output of the v4l2-compliance test (after fixing 
any issues
it raises of course), either as a reply to this post or in the 
cover letter
of a v7 version of this series if you had to make changes.

Sure, I will rebase on top of Sakari tree and will update the 
compliance
tests and run them again.

This should expedite merging this series for 4.20.

Thanks!

	Hans

Ok, thanks for this. I will try to do it soon.

---
Cheers,
	Rui