Thread (19 messages) 19 messages, 4 authors, 2018-08-29
STALE2872d
Revisions (2)
  1. v2 current
  2. v3 [diff vs current]

[PATCH v2 1/6] dt-bindings: reset: Add PDC Global binding for SDM845 SoCs

From: Sibi Sankar <hidden>
Date: 2018-08-24 13:19:22
Also in: linux-arm-msm, linux-remoteproc, lkml
Subsystem: arm/qualcomm mailing list, open firmware and flattened device tree bindings, reset controller framework, the rest · Maintainers: Rob Herring, Krzysztof Kozlowski, Conor Dooley, Philipp Zabel, Linus Torvalds

Add PDC Global(Power Domain Controller) binding for SDM845 SoCs.

Signed-off-by: Sibi Sankar <redacted>
---
 .../bindings/reset/qcom,pdc-global.txt        | 52 +++++++++++++++++++
 include/dt-bindings/reset/qcom,sdm845-pdc.h   | 20 +++++++
 2 files changed, 72 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/reset/qcom,pdc-global.txt
 create mode 100644 include/dt-bindings/reset/qcom,sdm845-pdc.h
diff --git a/Documentation/devicetree/bindings/reset/qcom,pdc-global.txt b/Documentation/devicetree/bindings/reset/qcom,pdc-global.txt
new file mode 100644
index 000000000000..69f9edca9503
--- /dev/null
+++ b/Documentation/devicetree/bindings/reset/qcom,pdc-global.txt
@@ -0,0 +1,52 @@
+PDC Global
+======================================
+
+This binding describes a reset-controller found on PDC-Global(Power Domain
+Controller) block for Qualcomm Technologies Inc SDM845 SoCs.
+
+Required properties:
+- compatible:
+	Usage: required
+	Value type: <string>
+	Definition: must be:
+		    "qcom,sdm845-pdc-global"
+
+- reg:
+	Usage: required
+	Value type: <prop-encoded-array>
+	Definition: must specify the base address and size of the register
+	            space.
+
+- #reset-cells:
+	Usage: required
+	Value type: <uint>
+	Definition: must be 1; cell entry represents the reset index.
+
+Example:
+
+pdc_reset: reset-controller@b2e0000 {
+	compatible = "qcom,sdm845-pdc-global";
+	reg = <0xb2e0000 0x20000>;
+	#reset-cells = <1>;
+};
+
+PDC reset clients
+======================================
+
+Device nodes that need access to reset lines should
+specify them as a reset phandle in their corresponding node as
+specified in reset.txt.
+
+For list of all valid reset indicies see
+<dt-bindings/reset/qcom,sdm845-pdc.h>
+
+Example:
+
+modem-pil@4080000 {
+	...
+
+	resets = <&pdc_reset PDC_MODEM_SYNC_RESET>;
+	reset-names = "pdc_reset";
+
+	...
+};
diff --git a/include/dt-bindings/reset/qcom,sdm845-pdc.h b/include/dt-bindings/reset/qcom,sdm845-pdc.h
new file mode 100644
index 000000000000..53c37f9c319a
--- /dev/null
+++ b/include/dt-bindings/reset/qcom,sdm845-pdc.h
@@ -0,0 +1,20 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2018 The Linux Foundation. All rights reserved.
+ */
+
+#ifndef _DT_BINDINGS_RESET_PDC_SDM_845_H
+#define _DT_BINDINGS_RESET_PDC_SDM_845_H
+
+#define PDC_APPS_SYNC_RESET	0
+#define PDC_SP_SYNC_RESET	1
+#define PDC_AUDIO_SYNC_RESET	2
+#define PDC_SENSORS_SYNC_RESET	3
+#define PDC_AOP_SYNC_RESET	4
+#define PDC_DEBUG_SYNC_RESET	5
+#define PDC_GPU_SYNC_RESET	6
+#define PDC_DISPLAY_SYNC_RESET	7
+#define PDC_COMPUTE_SYNC_RESET	8
+#define PDC_MODEM_SYNC_RESET	9
+
+#endif
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help