Re: [PATCH 1/2] dt-bindings: dmaengine: add DT binding for UniPhier MIO DMAC
From: Rob Herring <robh+dt@kernel.org>
Date: 2018-08-21 19:09:35
Also in:
dmaengine, lkml
On Tue, Aug 21, 2018 at 4:48 AM Masahiro Yamada [off-list ref] wrote:
(+CC Rob, DT, LKML) I forgot to CC this to DT community...
You really need to resend so that patchwork will pick it up and I'll see it for sure.
2018-08-21 18:30 GMT+09:00 Masahiro Yamada [off-list ref]:quoted
The MIO DMAC (Media IO DMA Controller) is used in UniPhier LD4, Pro4, and sLD8 SoCs. Signed-off-by: Masahiro Yamada <redacted> --- .../devicetree/bindings/dma/uniphier-mio-dmac.txt | 28 ++++++++++++++++++++++ 1 file changed, 28 insertions(+) create mode 100644 Documentation/devicetree/bindings/dma/uniphier-mio-dmac.txtdiff --git a/Documentation/devicetree/bindings/dma/uniphier-mio-dmac.txt b/Documentation/devicetree/bindings/dma/uniphier-mio-dmac.txt new file mode 100644 index 0000000..a9e969e --- /dev/null +++ b/Documentation/devicetree/bindings/dma/uniphier-mio-dmac.txt@@ -0,0 +1,28 @@ +UniPhier Media IO DMA controller + +This works as an external DMA engine for SD/eMMC controllers etc. +found in UniPhier LD4, Pro4, sLD8 SoCs. + +Required properties: +- compatible: should be "socionext,uniphier-mio-dmac". +- reg: offset and length of the register set for the device. +- interrupts: a list of interrupt specifiers associated with the DMA channels. +- clocks: a single clock specifier +- #dma-cells: should be <1>. The single cell represents the channel number. +- dma-channels: specify the number of the DMA channels. This should match to + the number of tuples in the interrupts property. + +Example: + dmac: dmac@5a000000 {
dma-controller@...
quoted
+ compatible = "socionext,uniphier-mio-dmac"; + reg = <0x5a000000 0x1000>; + interrupts = <0 68 4>, <0 68 4>, <0 69 4>, <0 70 4>, + <0 71 4>, <0 72 4>, <0 73 4>, <0 74 4>; + clocks = <&mio_clk 7>; + #dma-cells = <1>; + dma-channels = <8>; + }; + +Note: +In the example above, "interrupts = <0 68 4>, <0 68 4>, ..." is not a typo. +The first two channels share a single interrupt line. -- 2.7.4-- Best Regards Masahiro Yamada