[PATCH v4 3/7] i2c: designware: allow IP specific sda_hold_time
From: Alexandre Belloni <alexandre.belloni@bootlin.com>
Date: 2018-08-16 08:46:22
Also in:
linux-i2c, linux-mips, lkml
Subsystem:
i2c subsystem, i2c subsystem host drivers, synopsys designware i2c driver, the rest · Maintainers:
Andi Shyti, Mika Westerberg, Linus Torvalds
Because some old designware IPs were not supporting setting an SDA hold time, vendors developed their own solution. Add a way for the final driver to provide its own SDA hold time handling. Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> --- drivers/i2c/busses/i2c-designware-common.c | 2 ++ drivers/i2c/busses/i2c-designware-core.h | 1 + 2 files changed, 3 insertions(+)
diff --git a/drivers/i2c/busses/i2c-designware-common.c b/drivers/i2c/busses/i2c-designware-common.c
index bcc1bcbf0350..4f4bcefbf404 100644
--- a/drivers/i2c/busses/i2c-designware-common.c
+++ b/drivers/i2c/busses/i2c-designware-common.c@@ -214,6 +214,8 @@ int i2c_dw_set_sda_hold(struct dw_i2c_dev *dev) dev_dbg(dev->dev, "SDA Hold Time TX:RX = %d:%d\n", dev->sda_hold_time & ~(u32)DW_IC_SDA_HOLD_RX_MASK, dev->sda_hold_time >> DW_IC_SDA_HOLD_RX_SHIFT); + } else if (dev->set_sda_hold_time) { + dev->set_sda_hold_time(dev); } else if (dev->sda_hold_time) { dev_warn(dev->dev, "Hardware too old to adjust SDA hold time.\n");
diff --git a/drivers/i2c/busses/i2c-designware-core.h b/drivers/i2c/busses/i2c-designware-core.h
index cdba58a3e359..ad4e9619d365 100644
--- a/drivers/i2c/busses/i2c-designware-core.h
+++ b/drivers/i2c/busses/i2c-designware-core.h@@ -282,6 +282,7 @@ struct dw_i2c_dev { void (*disable)(struct dw_i2c_dev *dev); void (*disable_int)(struct dw_i2c_dev *dev); int (*init)(struct dw_i2c_dev *dev); + int (*set_sda_hold_time)(struct dw_i2c_dev *dev); int mode; struct i2c_bus_recovery_info rinfo; };
--
2.18.0