[PATCH 23/40] mmc: tegra: Configure default trim value on reset
From: Aapo Vienamo <hidden>
Date: 2018-08-01 16:33:56
Also in:
linux-mmc, linux-tegra, lkml
Subsystem:
multimedia card (mmc), secure digital (sd) and sdio subsystem, secure digital host controller interface (sdhci) driver, the rest · Maintainers:
Ulf Hansson, Adrian Hunter, Linus Torvalds
Program the outbound sampling trim value in tegra_sdhci_reset(). Unlike the outbound tap value this does not depend on the signaling mode and needs to be only programmed once. Signed-off-by: Aapo Vienamo <redacted> --- drivers/mmc/host/sdhci-tegra.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-)
diff --git a/drivers/mmc/host/sdhci-tegra.c b/drivers/mmc/host/sdhci-tegra.c
index 9550d35..4cef437 100644
--- a/drivers/mmc/host/sdhci-tegra.c
+++ b/drivers/mmc/host/sdhci-tegra.c@@ -37,6 +37,8 @@ #define SDHCI_TEGRA_VENDOR_CLOCK_CTRL 0x100 #define SDHCI_CLOCK_CTRL_TAP_MASK 0x00ff0000 #define SDHCI_CLOCK_CTRL_TAP_SHIFT 16 +#define SDHCI_CLOCK_CTRL_TRIM_MASK 0x1f000000 +#define SDHCI_CLOCK_CTRL_TRIM_SHIFT 24 #define SDHCI_CLOCK_CTRL_SDR50_TUNING_OVERRIDE BIT(5) #define SDHCI_CLOCK_CTRL_PADPIPE_CLKEN_OVERRIDE BIT(3) #define SDHCI_CLOCK_CTRL_SPI_MODE_CLKEN_OVERRIDE BIT(2)
@@ -287,7 +289,8 @@ static void tegra_sdhci_reset(struct sdhci_host *host, u8 mask) SDHCI_MISC_CTRL_ENABLE_DDR50 | SDHCI_MISC_CTRL_ENABLE_SDR104); - clk_ctrl &= ~SDHCI_CLOCK_CTRL_SPI_MODE_CLKEN_OVERRIDE; + clk_ctrl &= ~(SDHCI_CLOCK_CTRL_TRIM_MASK | + SDHCI_CLOCK_CTRL_SPI_MODE_CLKEN_OVERRIDE); pad_and_regulators_valid = tegra_sdhci_is_pad_and_regulator_valid(host); if (pad_and_regulators_valid) {
@@ -305,6 +308,8 @@ static void tegra_sdhci_reset(struct sdhci_host *host, u8 mask) clk_ctrl |= SDHCI_CLOCK_CTRL_SDR50_TUNING_OVERRIDE; } + clk_ctrl |= tegra_host->default_trim << SDHCI_CLOCK_CTRL_TRIM_SHIFT; + sdhci_writel(host, misc_ctrl, SDHCI_TEGRA_VENDOR_MISC_CTRL); sdhci_writel(host, clk_ctrl, SDHCI_TEGRA_VENDOR_CLOCK_CTRL);
--
2.7.4