Thanks for the review,

On 31/07/18 21:45, Rob Herring wrote:

On Fri, Jul 27, 2018 at 01:17:59PM +0100, Srinivas Kandagatla wrote:

quoted

WCD9335 supports two lines of irqs INTR1 and INTR2.
Multiple interrupts are muxed via these lines.
INTR1 consists of all possible interrupt sources like:
Ear OCP, HPH OCP, MBHC, MAD, VBAT, and SVA
INTR2 is a subset of first interrupt sources like MAD, VBAT, and SVA

Signed-off-by: Srinivas Kandagatla <redacted>
---
  drivers/mfd/Makefile                |   2 +-
  drivers/mfd/wcd9335-core.c          |   9 ++
  drivers/mfd/wcd9335-irq.c           | 172 ++++++++++++++++++++++++++++++++++++
  include/dt-bindings/mfd/wcd9335.h   |  43 +++++++++

I'm confused why these are defined here. The binding for the wc9335 is
not an interrupt-controller.

I can move this defines to include/linux/mfd/wcd9335/wcd9335.h as there 
are no active users for this, but I  was hoping that these can be used 
in DT in future.

WCD9335 is an interrupt controller too. It muxes multiple interrupts via 
a gpio line interrupt.

I did mention this in the bindings.

+- interrupt-controller:
+	Usage: required
+	Definition: Indicating that this is a interrupt controller
+
+- #interrupt-cells:
+	Usage: required
+	Value type: <int>
+	Definition: should be 1
+

quoted

  include/linux/mfd/wcd9335/wcd9335.h |   3 +
  5 files changed, 228 insertions(+), 1 deletion(-)
  create mode 100644 drivers/mfd/wcd9335-irq.c
  create mode 100644 include/dt-bindings/mfd/wcd9335.h

Thanks,
srini