Thanks for reviewing,

On 30/07/18 05:12, Vinod wrote:

On 27-07-18, 13:17, Srinivas Kandagatla wrote:

quoted

+obj-$(CONFIG_MFD_WCD9335)	+= wcd9335.o
+wcd9335-objs			:= wcd9335-core.o
+

no slimbus objs?

Yep, I will try to tidy this up a bit in next version.

quoted

+static int wcd9335_bring_up(struct wcd9335 *wcd)
+{
+	struct regmap *rm = wcd->regmap;
+	int val, byte0;
+	int ret = 0;
+
+	regmap_read(rm, WCD9335_CHIP_TIER_CTRL_EFUSE_VAL_OUT0, &val);
+	regmap_read(rm, WCD9335_CHIP_TIER_CTRL_CHIP_ID_BYTE0, &byte0);
+
+	if ((val < 0) || (byte0 < 0)) {
+		dev_err(wcd->dev, "wcd9335 codec version detection fail!\n");
+		return -EINVAL;
+	}
+
+	if (byte0 == 0x1) {
+		dev_info(wcd->dev, "wcd9335 codec version is v2.0\n");
+		wcd->version = WCD9335_VERSION_2_0;
+		regmap_write(rm, WCD9335_CODEC_RPM_RST_CTL, 0x01);
+		regmap_write(rm, WCD9335_SIDO_SIDO_TEST_2, 0x00);
+		regmap_write(rm, WCD9335_SIDO_SIDO_CCL_8, 0x6F);
+		regmap_write(rm, WCD9335_BIAS_VBG_FINE_ADJ, 0x65);
+		regmap_write(rm, WCD9335_CODEC_RPM_PWR_CDC_DIG_HM_CTL, 0x5);
+		regmap_write(rm, WCD9335_CODEC_RPM_PWR_CDC_DIG_HM_CTL, 0x7);
+		regmap_write(rm, WCD9335_CODEC_RPM_PWR_CDC_DIG_HM_CTL, 0x3);
+		regmap_write(rm, WCD9335_CODEC_RPM_RST_CTL, 0x3);
+	} else {
+		dev_err(wcd->dev, "wcd9335 codec version not supported\n");
+		ret = -EINVAL;
+	}
+
+	return ret;

we can do return 0 and remove the variable as it is not used anywhere
else.

Yes, it makes sense!


Thanks,
srini