[PATCH v8 4/6] regulator: pfuze100: add fsl, pmic-stby-poweroff property
From: Oleksij Rempel <o.rempel@pengutronix.de>
Date: 2018-07-26 09:22:49
Also in:
linux-arm-kernel, linux-clk, lkml
Subsystem:
open firmware and flattened device tree bindings, the rest, voltage and current regulator framework · Maintainers:
Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds, Liam Girdwood, Mark Brown
Document the new optional "fsl,pmic-stby-poweroff" property. Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Acked-by: Rob Herring <robh@kernel.org> --- Documentation/devicetree/bindings/regulator/pfuze100.txt | 7 +++++++ 1 file changed, 7 insertions(+)
diff --git a/Documentation/devicetree/bindings/regulator/pfuze100.txt b/Documentation/devicetree/bindings/regulator/pfuze100.txt
index f0ada3b14d70..f3b922f5a11f 100644
--- a/Documentation/devicetree/bindings/regulator/pfuze100.txt
+++ b/Documentation/devicetree/bindings/regulator/pfuze100.txt@@ -4,6 +4,13 @@ Required properties: - compatible: "fsl,pfuze100", "fsl,pfuze200", "fsl,pfuze3000" - reg: I2C slave address +Optional properties: +- fsl,pmic-stby-poweroff: if present, configure the PMIC to shutdown all + power rails when PMIC_STBY_REQ line is asserted during the power off sequence. + Use this option if the SoC should be powered off by external power + management IC (PMIC) on PMIC_STBY_REQ signal. + As opposite to PMIC_STBY_REQ boards can implement PMIC_ON_REQ signal. + Required child node: - regulators: This is the list of child nodes that specify the regulator initialization data for defined regulators. Please refer to below doc
--
2.18.0