[PATCH V1 2/3] Documentation: sdhci-msm: Add entries for passing load values
From: Vijay Viswanath <hidden>
Date: 2018-07-20 10:46:38
Also in:
linux-arm-msm, linux-mmc, lkml
Subsystem:
multimedia card (mmc), secure digital (sd) and sdio subsystem, open firmware and flattened device tree bindings, the rest · Maintainers:
Ulf Hansson, Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds
The load a particular sdhc controller should request from a regulator is device specific and hence each device should individually vote for the required load. Signed-off-by: Vijay Viswanath <redacted> --- Documentation/devicetree/bindings/mmc/sdhci-msm.txt | 6 ++++++ 1 file changed, 6 insertions(+)
diff --git a/Documentation/devicetree/bindings/mmc/sdhci-msm.txt b/Documentation/devicetree/bindings/mmc/sdhci-msm.txt
index 502b3b8..ee34f28 100644
--- a/Documentation/devicetree/bindings/mmc/sdhci-msm.txt
+++ b/Documentation/devicetree/bindings/mmc/sdhci-msm.txt@@ -26,6 +26,11 @@ Required properties: "cal" - reference clock for RCLK delay calibration (optional) "sleep" - sleep clock for RCLK delay calibration (optional) +Optional properties: +- <supply>-current-level - specifies load levels for supply during BUS_ON + and BUS_OFF states in power irq. Should be specified in + pairs (lpm, hpm), for BUS_OFF and BUS_ON respectively. + Units uA. Example: sdhc_1: sdhci@f9824900 {
@@ -37,6 +42,7 @@ Example: vmmc-supply = <&pm8941_l20>; vqmmc-supply = <&pm8941_s3>; + vqmmc-current-level = <200 22000>; pinctrl-names = "default"; pinctrl-0 = <&sdc1_clk &sdc1_cmd &sdc1_data>;
--
Qualcomm India Private Limited, on behalf of Qualcomm Innovation Center, Inc.
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, a Linux Foundation Collaborative Project.