[PATCH v2 0/6] phy: qcom: Updates for USB PHYs on SDM845

SDM845 has two USB instances each with QUSB2 and QMP PHYs.
One of the QMP PHY is USB-DP (DisplayPort) combo PHY where
as other one is single lane UNI-PHY (without DP support).
Changes are related to PHY configuration for electrical
parameters tuning to improve eye-diagram and some fixes.

Changes since v1:
 - Updated qusb2 compatibility name as per comment from Vivek.

Manu Gautam (6):
  phy: qcom-qmp: Enable pipe_clk before checking USB3 PHY_STATUS
  phy: qcom-qusb2: Fix crash if nvmem cell not specified
  dt-bindings: phy-qcom-qmp: Update bindings for sdm845
  phy: qcom-qmp: Add QMP V3 USB3 UNI PHY support for sdm845
  dt-bindings: phy-qcom-usb2: Update bindings for sdm845
  phy: qcom-qusb2: Add QUSB2 PHYs support for sdm845

 .../devicetree/bindings/phy/qcom-qmp-phy.txt       |   4 +-
 .../devicetree/bindings/phy/qcom-qusb2-phy.txt     |   4 +-
 drivers/phy/qualcomm/phy-qcom-qmp.c                | 166 +++++++++++++++++++++
 drivers/phy/qualcomm/phy-qcom-qmp.h                |   5 +
 drivers/phy/qualcomm/phy-qcom-qusb2.c              |  43 ++++++
 5 files changed, 220 insertions(+), 2 deletions(-)

-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project