Thread (20 messages) 20 messages, 4 authors, 2018-04-19
STALE3009d
Revisions (5)
  1. v1 [diff vs current]
  2. v1 [diff vs current]
  3. v3 current
  4. v4 [diff vs current]
  5. v5 [diff vs current]

[PATCH v3 1/7] dt-bindings: reset: Add AOSS reset bindings for SDM845 SoCs

From: Sibi S <hidden>
Date: 2018-03-14 09:22:23
Also in: linux-arm-msm, linux-remoteproc, lkml
Subsystem: arm/qualcomm mailing list, open firmware and flattened device tree bindings, reset controller framework, the rest · Maintainers: Rob Herring, Krzysztof Kozlowski, Conor Dooley, Philipp Zabel, Linus Torvalds

Add SDM845 AOSS (always on subsystem) reset controller binding

Signed-off-by: Sibi S <redacted>
---
 .../devicetree/bindings/reset/qcom,aoss-reset.txt  | 54 ++++++++++++++++++++++
 include/dt-bindings/reset/qcom,sdm845-aoss.h       | 17 +++++++
 2 files changed, 71 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/reset/qcom,aoss-reset.txt
 create mode 100644 include/dt-bindings/reset/qcom,sdm845-aoss.h
diff --git a/Documentation/devicetree/bindings/reset/qcom,aoss-reset.txt b/Documentation/devicetree/bindings/reset/qcom,aoss-reset.txt
new file mode 100644
index 0000000..04dca76
--- /dev/null
+++ b/Documentation/devicetree/bindings/reset/qcom,aoss-reset.txt
@@ -0,0 +1,54 @@
+Qualcomm AOSS Reset Controller
+======================================
+
+This binding describes a reset-controller found on AOSS (always on subsystem)
+for Qualcomm SDM845 SoCs.
+
+Required properties:
+- compatible:
+	Usage: required
+	Value type: <string>
+	Definition: must be:
+		    "qcom,sdm845-aoss-reset"
+
+- reg:
+	Usage: required
+	Value type: <prop-encoded-array>
+	Definition: must specify the base address and size of the register
+	            space.
+
+
+- #reset-cells:
+	Usage: required
+	Value type: <uint>
+	Definition: must be 1; cell entry represents the reset index.
+
+example:
+
+aoss_reset: qcom,reset-controller@b2e0100 {
+	compatible = "qcom,sdm845-aoss-reset";
+	reg = <0xc2b0000 0x20004>;
+	#reset-cells = <1>;
+};
+
+
+Specifying reset lines connected to IP modules
+==============================================
+
+Device nodes that need access to reset lines should
+specify them as a reset phandle in their corresponding node as
+specified in reset.txt.
+
+For list of all valid reset indicies see
+<dt-bindings/reset/qcom,sdm845-aoss.h>
+
+Example:
+
+modem-pil@4080000 {
+	...
+
+	resets = <&aoss_reset AOSS_CC_MSS_RESTART>;
+	reset-names = "mss_restart";
+
+	...
+};
diff --git a/include/dt-bindings/reset/qcom,sdm845-aoss.h b/include/dt-bindings/reset/qcom,sdm845-aoss.h
new file mode 100644
index 0000000..e9b38fc
--- /dev/null
+++ b/include/dt-bindings/reset/qcom,sdm845-aoss.h
@@ -0,0 +1,17 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2018 The Linux Foundation. All rights reserved.
+ */
+
+#ifndef _DT_BINDINGS_RESET_AOSS_SDM_845_H
+#define _DT_BINDINGS_RESET_AOSS_SDM_845_H
+
+#define AOSS_CC_MSS_RESTART	0
+#define AOSS_CC_CAMSS_RESTART	1
+#define AOSS_CC_VENUS_RESTART	2
+#define AOSS_CC_GPU_RESTART	3
+#define AOSS_CC_DISPSS_RESTART	4
+#define AOSS_CC_WCSS_RESTART	5
+#define AOSS_CC_LPASS_RESTART	6
+
+#endif
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help