Re: [PATCH 1/6] arm64: dts: renesas: r8a77965: Add "reg" properties
flat view
From: jacopo mondi <jacopo@jmondi.org>
Date: 2018-02-23 12:23:01
Also in:
linux-arm-kernel, linux-renesas-soc, lkml
Hi Geert, On Fri, Feb 23, 2018 at 10:19:21AM +0100, Geert Uytterhoeven wrote:
Hi Jacopo, On Thu, Feb 22, 2018 at 8:06 PM, Jacopo Mondi [off-list ref] wrote:quoted
Add "reg" properties to place-holder nodes with unit address defined for R-Car M3-N SoC. This silences the following DTC compiler warning: Warning (unit_address_vs_reg): Node /soc/... has a unit name, but no reg property Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>A few minor nits below... Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>quoted
--- a/arch/arm64/boot/dts/renesas/r8a77965.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a77965.dtsiquoted
@@ -520,130 +521,163 @@ }; avb: ethernet@e6800000 { + reg = <0 0xe6800000 0 0x800>, <0 0xe6a00000 0 0x10000>;The first reg part would be sufficient for a placeholder. I think even setting the size to zero would work...
Not sure I fully got your point here. Do you mean I have to remove the second (and third, fourth...) addresses range block in all placeholder device nodes with multiple blocks (avb, du, rcar-sound) ? Do you mean I have to set to 0 the address length in all placeholder nodes? What's the point if they have to be added back once the device is enabled?
quoted
du: display@feb00000 { + reg = <0 0xfeb00000 0 0x70000>,Unlike M3-W, the M3-N DU has a third channel, so the size is too small.
Will fix in v2
quoted
+ <0 0xfeb90000 0 0x14>; /* placeholder */quoted
@@ -703,38 +745,47 @@ }; usb2_phy1: usb-phy@ee0a0200 { + reg = <0 0xee0a0200 0 0x700>; /* placeholder */ };To be moved up, next to the other usb2 devices?
Will add a patch to move this next to other usb2 device nodes in v2. I will send v2 as soon as first review comment gets clarified. Thanks j
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds