On Thu, Feb 15, 2018 at 02:30:28PM +0000, Kieran Bingham wrote:

Hi Laurent, Simon,

On 15/02/18 14:12, Laurent Pinchart wrote:

quoted

Hi Kieran,

Thank you for the patch.

On Thursday, 15 February 2018 10:38:21 EET Kieran Bingham wrote:

quoted

From: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>

Enable the DU, providing only the VGA output for now.

Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>

Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>

I assume Simon will take care of this patch.

That will be great, - One small caveat on this patch though:

quoted

quoted

---
 arch/arm64/boot/dts/renesas/r8a77995-draak.dts | 51 +++++++++++++++++++++++
 1 file changed, 51 insertions(+)

diff --git a/arch/arm64/boot/dts/renesas/r8a77995-draak.dts

b/arch/arm64/boot/dts/renesas/r8a77995-draak.dts index
af07da240be0..668e246dfc5d 100644

--- a/arch/arm64/boot/dts/renesas/r8a77995-draak.dts
+++ b/arch/arm64/boot/dts/renesas/r8a77995-draak.dts

@@ -27,6 +27,38 @@
 		stdout-path = "serial0:115200n8";
 	};

+	vga {
+		compatible = "vga-connector";
+
+		port {
+			vga_in: endpoint {
+				remote-endpoint = <&adv7123_out>;
+			};
+		};
+	};
+
+	vga-encoder {
+		compatible = "adi,adv7123";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				adv7123_in: endpoint {
+					remote-endpoint = <&du_out_rgb>;
+				};
+			};
+			port@1 {
+				reg = <1>;
+				adv7123_out: endpoint {
+					remote-endpoint = <&vga_in>;
+				};
+			};
+		};
+	};
+
 	memory@48000000 {
 		device_type = "memory";
 		/* first 128MB is reserved for secure area. */

@@ -46,6 +78,11 @@
 		};
 	};

+	du_pins: du {
+		groups = "du_rgb888", "du_sync", "du_disp", "du_dotclkout0";

The du_dotclkout0 is named differently in Uli's patch. (Of course I believe my
version is correct, but there is some precedent set it would seem).

Anyway, If Uli's version of the PFC is accepted (Which I'm sure it will be),
then I will have to re-spin this patch with the 'different' "du_clk_out_0" value
in the groups.

Thanks, please repost once this has been shaken out.