[PATCH 8/8] [PoC] arm64: dts: renesas: r8a77995-draak: Add ADV7612
From: Kieran Bingham <kbingham@kernel.org>
Date: 2018-02-15 08:39:18
Also in:
linux-arm-kernel, linux-renesas-soc, lkml
Subsystem:
arm/risc-v/renesas architecture, the rest · Maintainers:
Geert Uytterhoeven, Magnus Damm, Linus Torvalds
From: Kieran Bingham <kieran.bingham@ideasonboard.com> Provide a node for the ADV7612. There is no VIN support yet, so this node will only instantiate the device on the I2C bus for I2C address testing. Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com> --- arch/arm64/boot/dts/renesas/r8a77995-draak.dts | 43 ++++++++++++++++++++++++++ 1 file changed, 43 insertions(+)
diff --git a/arch/arm64/boot/dts/renesas/r8a77995-draak.dts b/arch/arm64/boot/dts/renesas/r8a77995-draak.dts
index df0c7773cb7d..d7dd471c9fde 100644
--- a/arch/arm64/boot/dts/renesas/r8a77995-draak.dts
+++ b/arch/arm64/boot/dts/renesas/r8a77995-draak.dts@@ -27,6 +27,17 @@ stdout-path = "serial0:115200n8"; }; + hdmi-in { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con_in: endpoint { + remote-endpoint = <&adv7612_in>; + }; + }; + }; + hdmi-out { compatible = "hdmi-connector"; type = "a";
@@ -168,6 +179,38 @@ }; }; }; + + hdmi-in@4c { + compatible = "adi,adv7612"; + reg = <0x4c>, <0x5a>, <0x5b>, <0x5c>, <0x5d>, <0x5e>, <0x5f>, + <0x6a>, <0x6b>, <0x6c>, <0x6d>, <0x6e>, <0x6f>; + reg-names = "main", "avlink", "cec", "infoframe", "esdp", + "dpp", "afe", "rep", "edid", "hdmi", "test", + "cp", "vdp"; + + /* ADV7612_INTn connected only to test point CP56. */ + + default-input = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + adv7612_in: endpoint { + remote-endpoint = <&hdmi_con_in>; + }; + }; + + port@2 { + reg = <2>; + adv7612_out: endpoint { + // remote-endpoint = <&vin0ep2>; + }; + }; + }; + }; }; &i2c1 {
--
2.7.4