Re: [PATCH v3 2/2] ARM: dts: imx25-pinfunc: Always set SION for eSDHC CMD

On Wed, Jan 31, 2018 at 10:35:44PM +0100, Benoît Thébaudeau wrote:

The eSDHC does not work properly if the SION bit is not set for the
bidirectional CMD signal, whatever the eSDHC instance and the selected
pad. Therefore, setting SION is mandatory for all eSDHC CMD ports. Do
this for MX25_PAD_*__ESDHCn_CMD in imx25-pinfunc.h in order to enforce
this behavior for all boards.

This had already been done for eSDHC1, but not for eSDHC2. Also, define
MX25_PAD_FEC_MDC__ESDHC2_CMD so that all the possible cases are covered
from now on.

Cc: Uwe Kleine-König <redacted>
Signed-off-by: Benoît Thébaudeau <redacted>
Reviewed-by: Fabio Estevam <redacted>

Acked-by: Uwe Kleine-König <redacted>

Thanks
Uwe

-- 
Pengutronix e.K.                           | Uwe Kleine-König            |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html