Hi Tomasz,

Thanks for your reply.

On 01/19/2018 11:23 AM, Tomasz Figa wrote:

On Thu, Jan 18, 2018 at 8:52 PM, Jeffy Chen [off-list ref] wrote:

quoted

Add clocks in vop iommu nodes, since we are going to control clocks in
rockchip iommu driver.

Signed-off-by: Jeffy Chen <redacted>
---

Changes in v4: None
Changes in v3: None
Changes in v2: None

  arch/arm/boot/dts/rk3036.dtsi | 2 ++
  arch/arm/boot/dts/rk3288.dtsi | 4 ++++
  2 files changed, 6 insertions(+)

diff --git a/arch/arm/boot/dts/rk3036.dtsi b/arch/arm/boot/dts/rk3036.dtsi
index 3b704cfed69a..95b0ebc7a40f 100644
--- a/arch/arm/boot/dts/rk3036.dtsi
+++ b/arch/arm/boot/dts/rk3036.dtsi

@@ -197,6 +197,8 @@
                 reg = <0x10118300 0x100>;
                 interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
                 interrupt-names = "vop_mmu";
+               clocks = <&cru ACLK_LCDC>, <&cru SCLK_LCDC>, <&cru HCLK_LCDC>;
+               clock-names = "aclk_vop", "dclk_vop", "hclk_vop";

We should remove clock-names from IOMMU nodes. The Rockchip IOMMU
bindings don't define clock names and only the clocks property should
be given.

hmmm, i'm trying to switch to clk_bulk APIs, the get and put are name 
based. or maybe i can use clk_get/put along with other clk_bulk APIs

Not even saying that the names currently listed are not good examples,
they name SoC clock controller output, rather than device inputs.

Best regards,
Tomasz