Re: [PATCH] reset: ti-rstctrl: use the reset-simple driver
From: Tero Kristo <hidden>
Date: 2018-01-16 06:51:17
Also in:
linux-omap, lkml
On 16/01/18 03:11, Tony Lindgren wrote:
We can support the RSTCTRL reset registers on many TI SoCs with reset-simple. Cc: Dave Gerlach <redacted> Cc: Mark Rutland <redacted> Cc: Nishant Menon <redacted> Cc: Philipp Zabel <redacted> Cc: Rob Herring <redacted> Cc: Suman Anna <redacted> Cc: Tero Kristo <redacted> Signed-off-by: Tony Lindgren <redacted> --- That's all there is to it :) Naturally this can wait for v4.17 if necessary.
Thats pretty neat. :) -Tero
quoted hunk ↗ jump to hunk
--- .../devicetree/bindings/reset/ti-rstctrl.txt | 29 ++++++++++++++++++++++ drivers/reset/Kconfig | 2 +- drivers/reset/reset-simple.c | 1 + 3 files changed, 31 insertions(+), 1 deletion(-) create mode 100644 Documentation/devicetree/bindings/reset/ti-rstctrl.txtdiff --git a/Documentation/devicetree/bindings/reset/ti-rstctrl.txt b/Documentation/devicetree/bindings/reset/ti-rstctrl.txt new file mode 100644 --- /dev/null +++ b/Documentation/devicetree/bindings/reset/ti-rstctrl.txt@@ -0,0 +1,29 @@ +TI RSTCTRL Reset Controller + +Required properties: +- compatible : "ti,rstctrl" +- reg : Should contain 1 register ranges(address and length) +- #reset-cells: 1 + +Example: + + prcm: prcm@200000 { + compatible = "ti,am3-prcm", "simple-bus"; + reg = <0x200000 0x4000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x200000 0x4000>; + + prm_gfx: prm@1100 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x1100 0x100>; + + gfx_rstctrl: rstctrl@4 { + reg = <0x4 0x4>; + #reset-cells = <1>; + compatible = "ti,rstctrl"; + }; + }; + };diff --git a/drivers/reset/Kconfig b/drivers/reset/Kconfig --- a/drivers/reset/Kconfig +++ b/drivers/reset/Kconfig@@ -83,7 +83,7 @@ config RESET_PISTACHIO config RESET_SIMPLE bool "Simple Reset Controller Driver" if COMPILE_TEST - default ARCH_SOCFPGA || ARCH_STM32 || ARCH_STRATIX10 || ARCH_SUNXI || ARCH_ZX + default ARCH_OMAP2PLUS || ARCH_SOCFPGA || ARCH_STM32 || ARCH_STRATIX10 || ARCH_SUNXI || ARCH_ZX help This enables a simple reset controller driver for reset lines that that can be asserted and deasserted by toggling bits in a contiguous,diff --git a/drivers/reset/reset-simple.c b/drivers/reset/reset-simple.c --- a/drivers/reset/reset-simple.c +++ b/drivers/reset/reset-simple.c@@ -123,6 +123,7 @@ static const struct of_device_id reset_simple_dt_ids[] = { { .compatible = "st,stm32-rcc", }, { .compatible = "allwinner,sun6i-a31-clock-reset", .data = &reset_simple_active_low }, + { .compatible = "ti,rstctrl", }, { .compatible = "zte,zx296718-reset", .data = &reset_simple_active_low }, { /* sentinel */ },
-- Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki. Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html