Re: [PATCH V8 2/3] OPP: Introduce "required-opp" property
From: Rob Herring <hidden>
Date: 2017-12-21 22:26:26
Also in:
linux-pm, lkml
On Mon, Dec 18, 2017 at 03:51:29PM +0530, Viresh Kumar wrote:
Devices have inter-dependencies some times. For example a device that needs to run at 800 MHz, needs another device (e.g. Its power domain) to be configured at a particular operating performance point. This patch introduces a new property "required-opp" which can be present directly in a device's node (if it doesn't need to change its OPPs), or in device's OPP nodes. More details on the property can be seen in the binding itself. Signed-off-by: Viresh Kumar <redacted> --- Documentation/devicetree/bindings/opp/opp.txt | 8 +++ .../devicetree/bindings/power/power_domain.txt | 59 ++++++++++++++++++++++ 2 files changed, 67 insertions(+)
A couple of nits, otherwise: Reviewed-by: Rob Herring <redacted>
quoted hunk ↗ jump to hunk
diff --git a/Documentation/devicetree/bindings/opp/opp.txt b/Documentation/devicetree/bindings/opp/opp.txt index a3953a1bb1a1..4e4f30288c8b 100644 --- a/Documentation/devicetree/bindings/opp/opp.txt +++ b/Documentation/devicetree/bindings/opp/opp.txt@@ -159,6 +159,14 @@ properties. - status: Marks the node enabled/disabled. +- required-opp: This contains phandle to an OPP node in another device's OPP + table. It may contain an array of phandles, where each phandle points to an + OPP of a different device. It should not contain multiple phandles to the OPP + nodes in the same OPP table. This specifies the minimum required OPP of the + device(s), whose OPP's phandle is present in this property, for the + functioning of the current device at the current OPP (where this property is + present). + Example 1: Single cluster Dual-core ARM cortex A9, switch DVFS states together. / {diff --git a/Documentation/devicetree/bindings/power/power_domain.txt b/Documentation/devicetree/bindings/power/power_domain.txt index 61549840ab3b..f824763b202e 100644 --- a/Documentation/devicetree/bindings/power/power_domain.txt +++ b/Documentation/devicetree/bindings/power/power_domain.txt@@ -126,4 +126,63 @@ The node above defines a typical PM domain consumer device, which is located inside a PM domain with index 0 of a power controller represented by a node with the label "power". +Optional properties: +- required-opp: This contains phandle to an OPP node in another device's OPP + table. It may contain an array of phandles, where each phandle points to an + OPP of a different device. It should not contain multiple phandles to the OPP + nodes in the same OPP table. This specifies the minimum required OPP of the + device(s), whose OPP's phandle is present in this property, for the + functioning of the current device at the current OPP (where this property is + present). + +Example: +- OPP table for domain provider that provides two domains. + + domain0_opp_table: opp_table0 {
opp-table0
+ compatible = "operating-points-v2";
+
+ domain0_opp_0: opp-1000000000 {
+ opp-hz = /bits/ 64 <1000000000>;
+ opp-microvolt = <975000 970000 985000>;
+ };
+ domain0_opp_1: opp-1100000000 {
+ opp-hz = /bits/ 64 <1100000000>;
+ opp-microvolt = <1000000 980000 1010000>;
+ };
+ };
+
+ domain1_opp_table: opp_table1 {opp-table1
+ compatible = "operating-points-v2";
+
+ domain1_opp_0: opp-1200000000 {
+ opp-hz = /bits/ 64 <1200000000>;
+ opp-microvolt = <975000 970000 985000>;
+ };
+ domain1_opp_1: opp-1300000000 {
+ opp-hz = /bits/ 64 <1300000000>;
+ opp-microvolt = <1000000 980000 1010000>;
+ };
+ };
+
+ parent: power-controller@12340000 {
+ compatible = "foo,power-controller";
+ reg = <0x12340000 0x1000>;
+ #power-domain-cells = <1>;
+ operating-points-v2 = <&domain0_opp_table>, <&domain1_opp_table>;
+ };
+
+ leaky-device0@12350000 {
+ compatible = "foo,i-leak-current";
+ reg = <0x12350000 0x1000>;
+ power-domains = <&parent 0>;
+ required-opp = <&domain0_opp_0>;
+ };
+
+ leaky-device1@12350000 {
+ compatible = "foo,i-leak-current";
+ reg = <0x12350000 0x1000>;
+ power-domains = <&parent 1>;
+ required-opp = <&domain1_opp_1>;
+ };
+
[1]. Documentation/devicetree/bindings/power/domain-idle-state.txt
--
2.15.0.194.g9af6a3dea062-- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html