Thread (18 messages) 18 messages, 2 authors, 2017-12-16
STALE3135d

[PATCH v2 08/10] arm64: dts: qcom: msm8916-pins: move sdhc2 cd node with its siblings

From: Damien Riegel <hidden>
Date: 2017-12-07 15:20:02
Also in: linux-arm-kernel, linux-arm-msm, lkml
Subsystem: arm/qualcomm mailing list, arm/qualcomm support, the rest · Maintainers: Bjorn Andersson, Konrad Dybcio, Linus Torvalds

Nodes relative to the first sdhc node were interlaced with node of the
second sdhc. Move sdhc2_cd_pin with its siblings to prevent that. Also
rename the grouping node from sdhc2_cd_pin to pmx_sdc2_cd_pin, as
"pmx_sdc" is the prefix used by other nodes.

Signed-off-by: Damien Riegel <damien.riegel-4ysUXcep3aM1wj+D4I0NRVaTQe2KTcn/@public.gmane.org>
---
 arch/arm64/boot/dts/qcom/msm8916-pins.dtsi | 30 +++++++++++++++---------------
 1 file changed, 15 insertions(+), 15 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/msm8916-pins.dtsi b/arch/arm64/boot/dts/qcom/msm8916-pins.dtsi
index c79301f204b7..7704ddecb6c4 100644
--- a/arch/arm64/boot/dts/qcom/msm8916-pins.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8916-pins.dtsi
@@ -194,21 +194,6 @@
 		};
 	};
 
-	sdhc2_cd_pin {
-		sdc2_cd_on: cd_on {
-			pinmux {
-				function = "gpio";
-				pins = "gpio38";
-			};
-		};
-		sdc2_cd_off: cd_off {
-			pinmux {
-				function = "gpio";
-				pins = "gpio38";
-			};
-		};
-	};
-
 	pmx_sdc1_clk {
 		sdc1_clk_on: clk_on {
 			pinmux {
@@ -287,6 +272,21 @@
 		};
 	};
 
+	pmx_sdc2_cd_pin {
+		sdc2_cd_on: cd_on {
+			pinmux {
+				function = "gpio";
+				pins = "gpio38";
+			};
+		};
+		sdc2_cd_off: cd_off {
+			pinmux {
+				function = "gpio";
+				pins = "gpio38";
+			};
+		};
+	};
+
 	cdc-pdm-lines {
 		cdc_pdm_lines_act: pdm_lines_on {
 			pinmux {
-- 
2.15.0

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help