Thread (6 messages) 6 messages, 2 authors, 2017-10-23

Re: [PATCH 1/3] dt-bindings: soc: qcom: Support GLINK intents

From: Chris Lew <hidden>
Date: 2017-10-23 18:38:02
Also in: linux-arm-msm, lkml


On 10/19/2017 10:00 PM, Bjorn Andersson wrote:
On Wed 18 Oct 18:10 PDT 2017, Chris Lew wrote:
quoted
Virtual GLINK channels may know what throughput to expect from a
remoteproc. An intent advertises to the remoteproc this channel is
ready to receive data. Allow a channel to define the size and amount of
intents to be prequeued.

Signed-off-by: Chris Lew <redacted>
---
  Documentation/devicetree/bindings/soc/qcom/qcom,glink.txt | 10 ++++++++++
  1 file changed, 10 insertions(+)
diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,glink.txt b/Documentation/devicetree/bindings/soc/qcom/qcom,glink.txt
index b277eca861f7..6c21f76822ca 100644
--- a/Documentation/devicetree/bindings/soc/qcom/qcom,glink.txt
+++ b/Documentation/devicetree/bindings/soc/qcom/qcom,glink.txt
@@ -39,6 +39,14 @@ of these nodes are defined by the individual bindings for the specific function
   Definition: a list of channels tied to this function, used for matching
      the function to a set of virtual channels

+- intents:
qcom,intents or qcom,default-intents
Will use "qcom,intents".
quoted
+ Usage: optional
+ Value type: <prop-encoded-array>
+ Definition: a list of size,amount pairs describing what intents should
+    be preallocated for this virtual channel. If a GLINK node
+    supports intents, an intent advertises this channel is ready
+    to receive data.
Rather than describing what a GLINK intent is I would suggest that you
replace this second sentence with something like "This can be used to
tweak the default intents available for the channel to meet expectations
of the remote."
Sounds good, will change.
quoted
+
  = EXAMPLE
  The following example represents the GLINK RPM node on a MSM8996 device, with
  the function for the "rpm_request" channel defined, which is used for
@@ -69,6 +77,8 @@ regualtors and root clocks.
   compatible = "qcom,rpm-msm8996";
   qcom,glink-channels = "rpm_requests";

+ intents = <0x400 5
+   0x800 1>;
   ...
   };
   };
Regards,
Bjorn
Thanks,
Chris

-- 
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help