[PATCH 1/3] dt-bindings: soc: qcom: Support GLINK intents
From: Chris Lew <hidden>
Date: 2017-10-19 01:11:34
Also in:
linux-arm-msm, lkml
Subsystem:
arm/qualcomm mailing list, arm/qualcomm support, open firmware and flattened device tree bindings, the rest · Maintainers:
Bjorn Andersson, Konrad Dybcio, Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds
Virtual GLINK channels may know what throughput to expect from a remoteproc. An intent advertises to the remoteproc this channel is ready to receive data. Allow a channel to define the size and amount of intents to be prequeued. Signed-off-by: Chris Lew <redacted> --- Documentation/devicetree/bindings/soc/qcom/qcom,glink.txt | 10 ++++++++++ 1 file changed, 10 insertions(+)
diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,glink.txt b/Documentation/devicetree/bindings/soc/qcom/qcom,glink.txt
index b277eca861f7..6c21f76822ca 100644
--- a/Documentation/devicetree/bindings/soc/qcom/qcom,glink.txt
+++ b/Documentation/devicetree/bindings/soc/qcom/qcom,glink.txt@@ -39,6 +39,14 @@ of these nodes are defined by the individual bindings for the specific function Definition: a list of channels tied to this function, used for matching the function to a set of virtual channels +- intents: + Usage: optional + Value type: <prop-encoded-array> + Definition: a list of size,amount pairs describing what intents should + be preallocated for this virtual channel. If a GLINK node + supports intents, an intent advertises this channel is ready + to receive data. + = EXAMPLE The following example represents the GLINK RPM node on a MSM8996 device, with the function for the "rpm_request" channel defined, which is used for
@@ -69,6 +77,8 @@ regualtors and root clocks. compatible = "qcom,rpm-msm8996"; qcom,glink-channels = "rpm_requests"; + intents = <0x400 5 + 0x800 1>; ... }; };
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project