The H83T uses a compatible string different from the A23, but requires
the same clock autogating register setting.

The H3 also requires setting the clock autogating register, but has
the register at a different offset.

Add three suitable callbacks for the existing controller generations
and set it in the controller config structure.

Signed-off-by: Stefan Brüns <redacted>
---
 drivers/dma/sun6i-dma.c | 31 ++++++++++++++++++++++++++-----
 1 file changed, 26 insertions(+), 5 deletions(-)

diff --git a/drivers/dma/sun6i-dma.c b/drivers/dma/sun6i-dma.c
index bcd496edc70f..45bcd5271d94 100644
--- a/drivers/dma/sun6i-dma.c
+++ b/drivers/dma/sun6i-dma.c

@@ -48,6 +48,9 @@
 #define SUN8I_DMA_GATE		0x20
 #define SUN8I_DMA_GATE_ENABLE	0x4
 
+#define SUNXI_H3_SECURE_REG		0x20
+#define SUNXI_H3_DMA_GATE		0x28
+#define SUNXI_H3_DMA_GATE_ENABLE	0x4
 /*
  * Channels specific registers
  */

@@ -111,7 +114,7 @@ struct sun6i_dma_config {
 	 * however these SoCs really have and need this bit, as seen in the
 	 * BSP kernel source code.
 	 */
-	bool gate_needed;
+	void (*clock_autogate_enable)();
 };
 
 /*

@@ -267,6 +270,20 @@ static inline s8 convert_buswidth(enum dma_slave_buswidth addr_width)
 	return addr_width >> 1;
 }
 
+static void sun6i_enable_clock_autogate_noop(struct sun6i_dma_dev *sdev)
+{
+}