Re: [PATCH] mfd: Add support for TI LMP92001
From: Lee Jones <hidden>
Date: 2017-08-22 07:36:51
Also in:
linux-gpio, linux-iio, lkml
On Tue, 22 Aug 2017, s.abhisit@gmail.com wrote:
From: Abhisit Sangjan <redacted> TI LMP92001 Analog System Monitor and Controller 8-bit GPIOs. 12 DACs with 12-bit resolution. The GPIOs and DACs are shared port function with Cy function pin to take control the pin suddenly from external hardware. DAC's referance voltage selectable for Internal/External. 16 + 1 ADCs with 12-bit resolution. Built-in internal Temperature Sensor on channel 17. Windows Comparator Function is supported on channel 1-3 and 9-11 for monitoring with interrupt signal (pending to implement for interrupt). ADC's referance voltage selectable for Internal/External. Signed-off-by: Abhisit Sangjan <redacted> --- Documentation/ABI/testing/sysfs-bus-iio-lmp920001 | 92 ++++ .../devicetree/bindings/gpio/gpio-lmp92001.txt | 22 + .../bindings/iio/adc/ti-lmp92001-adc.txt | 21 + .../bindings/iio/dac/ti-lmp92001-dac.txt | 35 ++ drivers/gpio/Kconfig | 7 + drivers/gpio/Makefile | 1 + drivers/gpio/gpio-lmp92001.c | 209 +++++++++ drivers/iio/adc/Kconfig | 10 + drivers/iio/adc/Makefile | 1 + drivers/iio/adc/lmp92001-adc.c | 500 +++++++++++++++++++++ drivers/iio/dac/Kconfig | 9 + drivers/iio/dac/Makefile | 1 + drivers/iio/dac/lmp92001-dac.c | 390 ++++++++++++++++ drivers/mfd/Kconfig | 12 + drivers/mfd/Makefile | 4 + drivers/mfd/lmp92001-core.c | 308 +++++++++++++ drivers/mfd/lmp92001-debug.c | 67 +++ drivers/mfd/lmp92001-i2c.c | 215 +++++++++ include/linux/mfd/lmp92001/core.h | 119 +++++ include/linux/mfd/lmp92001/debug.h | 28 ++
You need to split this up into a patch-set containing smaller bite-sized patches. Each should contain the smallest (reasonable) change set, split up by subsystem and again by functionality. -- Lee Jones Linaro STMicroelectronics Landing Team Lead Linaro.org │ Open source software for ARM SoCs Follow Linaro: Facebook | Twitter | Blog