[PATCHv2 1/2] dt-bindings: backlight: add ti-lmu-backlight binding
From: Sebastian Reichel <hidden>
Date: 2017-07-17 13:40:10
Also in:
linux-fbdev, linux-omap, lkml
Subsystem:
led subsystem, open firmware and flattened device tree bindings, the rest · Maintainers:
Lee Jones, Pavel Machek, Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds
From: Milo Kim <redacted> Add DT binding for ti-lmu devices. Signed-off-by: Milo Kim <redacted> Signed-off-by: Sebastian Reichel <redacted> --- .../bindings/leds/backlight/ti-lmu-backlight.txt | 66 ++++++++++++++++++++++ 1 file changed, 66 insertions(+) create mode 100644 Documentation/devicetree/bindings/leds/backlight/ti-lmu-backlight.txt
diff --git a/Documentation/devicetree/bindings/leds/backlight/ti-lmu-backlight.txt b/Documentation/devicetree/bindings/leds/backlight/ti-lmu-backlight.txt
new file mode 100644
index 000000000000..5fb1458a9136
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/backlight/ti-lmu-backlight.txt@@ -0,0 +1,66 @@ +TI LMU backlight device tree bindings + +Required property: + - compatible: Should be one of: + "ti,lm3532-backlight" + "ti,lm3631-backlight" + "ti,lm3632-backlight" + "ti,lm3633-backlight" + "ti,lm3695-backlight" + "ti,lm3697-backlight" + +Optional properties: + There are two backlight control mode. One is I2C, the other is PWM mode. + Following properties are only specified in PWM mode. + Please note that LMU backlight device can have only one PWM channel. + + - pwms: OF device-tree PWM specification. + - pwm-names: a list of names for the PWM devices specified in the "pwms" + property. + + For the PWM user nodes, please refer to [1]. + +Child nodes: + LMU backlight is represented as sub-nodes of the TI LMU device [2]. + So, LMU backlight should have more than one backlight child node. + Each node exactly matches with backlight control bank configuration. + Maximum numbers of child nodes depend on the device. + + 1 = LM3631, LM3632, LM3695 + 2 = LM3633, LM3697 + 3 = LM3532 + + Required property of a child node: + - led-sources: List of enabled channels from 0 to 2. + Please refer to LED binding [3]. + For output channels, please refer to the datasheets [4]. + + Optional properties of a child node: + - label: Backlight channel identification. + Please refer to LED binding [3]. + - default-brightness-level: Backlight initial brightness value. + Type is <u32>. It is set as soon as backlight + device is created. + 0 ~ 2047 = LM3631, LM3632, LM3633, LM3695 and + LM3697 + 0 ~ 255 = LM3532 + - ramp-up-msec, ramp-down-msec: Light dimming effect properties. + Type is <u32>. Unit is millisecond. + 0 ~ 65 msec = LM3532 + 0 ~ 4000 msec = LM3631 + 0 ~ 16000 msec = LM3633 and LM3697 + - pwm-period: PWM period. Only valid in PWM brightness mode. + Type is <u32>. If this property is missing, then control + mode is set to I2C by default. + +Examples: Please refer to ti-lmu dt-bindings. [2]. + +[1] ../pwm/pwm.txt +[2] ../mfd/ti-lmu.txt +[3] ../leds/common.txt +[4] LM3532: http://www.ti.com/product/LM3532/datasheet + LM3631: http://www.ti.com/product/LM3631/datasheet + LM3632: http://www.ti.com/product/LM3632A/datasheet + LM3633: http://www.ti.com/product/LM3633/datasheet + LM3695: Datasheet is not opened yet, but only two strings are used. + LM3697: http://www.ti.com/product/LM3697/datasheet
--
2.13.2