[PATCH 2/5] ARM: sun8i: bananapi-m2-plus: Enable dwmac-sun8i
From: Corentin Labbe <hidden>
Date: 2017-06-05 19:23:45
Also in:
linux-arm-kernel, lkml
Subsystem:
the rest · Maintainer:
Linus Torvalds
The dwmac-sun8i hardware is present on the Banana Pi M2+ It uses an external PHY rtl8211e via RGMII. This patch create the needed regulator, emac and phy nodes. Signed-off-by: Corentin Labbe <redacted> --- arch/arm/boot/dts/sun8i-h3-bananapi-m2-plus.dts | 29 +++++++++++++++++++++++++ 1 file changed, 29 insertions(+)
diff --git a/arch/arm/boot/dts/sun8i-h3-bananapi-m2-plus.dts b/arch/arm/boot/dts/sun8i-h3-bananapi-m2-plus.dts
index 883072b611fa..d756ff825116 100644
--- a/arch/arm/boot/dts/sun8i-h3-bananapi-m2-plus.dts
+++ b/arch/arm/boot/dts/sun8i-h3-bananapi-m2-plus.dts@@ -52,6 +52,7 @@ compatible = "sinovoip,bpi-m2-plus", "allwinner,sun8i-h3"; aliases { + ethernet0 = &emac; serial0 = &uart0; serial1 = &uart1; };
@@ -84,6 +85,16 @@ }; }; + reg_gmac_3v3: gmac-3v3 { + compatible = "regulator-fixed"; + regulator-name = "gmac-3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + startup-delay-us = <100000>; + enable-active-high; + gpio = <&pio 3 6 GPIO_ACTIVE_HIGH>; + }; + wifi_pwrseq: wifi_pwrseq { compatible = "mmc-pwrseq-simple"; pinctrl-names = "default";
@@ -104,12 +115,30 @@ status = "okay"; }; +&emac { + pinctrl-names = "default"; + pinctrl-0 = <&emac_rgmii_pins>; + phy-supply = <®_gmac_3v3>; + phy-handle = <&ext_rgmii_phy>; + phy-mode = "rgmii"; + + allwinner,leds-active-low; + status = "okay"; +}; + &ir { pinctrl-names = "default"; pinctrl-0 = <&ir_pins_a>; status = "okay"; }; +&mdio { + ext_rgmii_phy: ethernet-phy@1 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0>; + }; +}; + &mmc0 { pinctrl-names = "default"; pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin>;
--
2.13.0