On Fri, 2017-06-02 at 01:46 -0700, Brendan Higgins wrote:

Added initial master support for Aspeed I2C controller. Supports
fourteen busses present in AST24XX and AST25XX BMC SoCs by Aspeed.

Signed-off-by: Brendan Higgins <redacted>

Reviewed-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---

Just spotted a completely minor/tivial nit:

+static int aspeed_i2c_master_xfer(struct i2c_adapter *adap,
+				  struct i2c_msg *msgs, int num)
+{
+	struct aspeed_i2c_bus *bus = adap->algo_data;
+	unsigned long time_left, flags;
+	int ret = 0;
+
+	spin_lock_irqsave(&bus->lock, flags);
+	bus->cmd_err = 0;

        ^^^^^^^^^^^^^^^^^

This is probably unnecessary now since it's initialized further down.

+	/* If bus is busy, attempt recovery. We assume a single master
+	 * environment.
+	 */
+	if (readl(bus->base + ASPEED_I2C_CMD_REG) & ASPEED_I2CD_BUS_BUSY_STS) {
+		spin_unlock_irqrestore(&bus->lock, flags);
+		ret = aspeed_i2c_recover_bus(bus);
+		if (ret)
+			return ret;
+		spin_lock_irqsave(&bus->lock, flags);
+	}
+
+	bus->cmd_err = 0;
+	bus->msgs = msgs;
+	bus->msgs_index = 0;
+	bus->msgs_count = num;

Now I'd like Andrew to give it a spin as he's currently
testing/debugging some i2c related stuff to be 100% certain it works
fine on our systems.

Thanks !

Cheers,
Ben.