[PATCH v5 09/10] arm: dts: genmai: Add user led device nodes
From: Jacopo Mondi <jacopo+renesas@jmondi.org>
Date: 2017-04-27 08:22:07
Also in:
linux-gpio, linux-renesas-soc, lkml
Subsystem:
the rest · Maintainer:
Linus Torvalds
Add device nodes for user leds on Genmai board. Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> --- arch/arm/boot/dts/r7s72100-genmai.dts | 14 ++++++++++++++ 1 file changed, 14 insertions(+)
diff --git a/arch/arm/boot/dts/r7s72100-genmai.dts b/arch/arm/boot/dts/r7s72100-genmai.dts
index 9add1b6..f7c512e 100644
--- a/arch/arm/boot/dts/r7s72100-genmai.dts
+++ b/arch/arm/boot/dts/r7s72100-genmai.dts@@ -11,6 +11,7 @@ /dts-v1/; #include "r7s72100.dtsi" +#include <dt-bindings/gpio/gpio.h> #include <dt-bindings/pinctrl/r7s72100-pinctrl.h> / {
@@ -35,6 +36,19 @@ #address-cells = <1>; #size-cells = <1>; }; + + leds { + status = "okay"; + compatible = "gpio-leds"; + + led1 { + gpios = <&port4 10 GPIO_ACTIVE_LOW>; + }; + + led2 { + gpios = <&port4 11 GPIO_ACTIVE_LOW>; + }; + }; }; &pinctrl {
--
2.7.4