Cc: devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Signed-off-by: Rob Clark <redacted>
---
 .../devicetree/bindings/iommu/qcom,iommu.txt       | 113 +++++++++++++++++++++
 1 file changed, 113 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/iommu/qcom,iommu.txt

diff --git a/Documentation/devicetree/bindings/iommu/qcom,iommu.txt b/Documentation/devicetree/bindings/iommu/qcom,iommu.txt
new file mode 100644
index 0000000..fd5b7fa
--- /dev/null
+++ b/Documentation/devicetree/bindings/iommu/qcom,iommu.txt

@@ -0,0 +1,113 @@
+* QCOM IOMMU v1 Implementation
+
+Qualcomm "B" family devices which are not compatible with arm-smmu have
+a similar looking IOMMU but without access to the global register space,
+and optionally requiring additional configuration to route context irqs
+to non-secure vs secure interrupt line.
+
+** Required properties:
+
+- compatible       : Should be one of:
+
+                        "qcom,msm8916-iommu"
+
+- clock-names      : Should be a pair of "iface" (required for IOMMUs
+                     register group access) and "bus" (required for
+                     the IOMMUs underlying bus access).
+- clocks           : Phandles for respective clocks described by
+                     clock-names.
+- #address-cells   : must be 1.
+- #size-cells      : must be 1.
+- #iommu-cells     : Must be 1.
+- ranges           : Base address and size of the iommu context banks.
+- qcom,iommu-secure-id  : secure-id.
+
+- List of sub-nodes, one per translation context bank.  Each sub-node
+  has the following required properties:
+
+  - compatible     : Should be one of:
+        - "qcom,msm-iommu-v1-ns"  : non-secure context bank
+        - "qcom,msm-iommu-v1-sec" : secure context bank
+  - reg            : Base address and size of context bank within the iommu
+  - interrupts     : The context fault irq.
+
+** Optional properties:
+
+- reg              : Base address and size of the SMMU local base, should
+                     be only specified if the iommu requires configuration
+                     for routing of context bank irq's to secure vs non-
+                     secure lines.  (Ie. if the iommu contains secure
+                     context banks)
+
+
+** Examples:
+
+	apps_iommu: iommu@1e20000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		#iommu-cells = <1>;
+		compatible = "qcom,msm8916-iommu", "qcom,msm-iommu-v1";