[PATCH v2 12/20] ARM: dts: sun8i: Enable dwmac-sun8i on the Orange Pi plus
From: Corentin Labbe <clabbe.montjoie@gmail.com>
Date: 2017-03-14 14:21:33
Also in:
linux-arm-kernel, lkml, netdev
Subsystem:
the rest · Maintainer:
Linus Torvalds
The dwmac-sun8i hardware is present on the Orange PI plus. It uses an external PHY rtl8211e via RGMII. This patch create the needed regulator, emac and phy nodes. Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com> --- arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts | 35 ++++++++++++++++++++++++++++ 1 file changed, 35 insertions(+)
diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts b/arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts
index 8c40ab7..4e075a2 100644
--- a/arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts
+++ b/arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts@@ -58,6 +58,18 @@ enable-active-high; gpio = <&pio 6 11 GPIO_ACTIVE_HIGH>; }; + + reg_gmac_3v3: gmac-3v3 { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&gmac_power_pin_orangepi>; + regulator-name = "gmac-3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + startup-delay-us = <100000>; + enable-active-high; + gpio = <&pio 3 6 GPIO_ACTIVE_HIGH>; + }; }; &ehci3 {
@@ -86,8 +98,31 @@ pins = "PG11"; function = "gpio_out"; }; + + gmac_power_pin_orangepi: gmac_power_pin@0 { + pins = "PD6"; + function = "gpio_out"; + drive-strength = <10>; + }; }; &usbphy { usb3_vbus-supply = <®_usb3_vbus>; }; + +&mdio { + ext_rgmii_phy: ethernet-phy@1 { + reg = <0>; + }; +}; + +&emac { + pinctrl-names = "default"; + pinctrl-0 = <&emac_rgmii_pins>; + phy-supply = <®_gmac_3v3>; + phy-handle = <&ext_rgmii_phy>; + phy-mode = "rgmii"; + + allwinner,leds-active-low; + status = "okay"; +};
--
2.10.2