Re: [PATCH v10 3/3] arm64: dts: exynos: Add support for S6E3HA2 panel device on TM2 board
From: Javier Martinez Canillas <hidden>
Date: 2017-03-06 14:42:55
Also in:
dri-devel, linux-arm-kernel, linux-samsung-soc, lkml
Hello Hoegeun, On 02/21/2017 10:09 PM, Hoegeun Kwon wrote:
quoted hunk ↗ jump to hunk
From: Hyungwon Hwang <redacted> This patch add the panel device tree node for S6E3HA2 display controller to TM2 dts. Signed-off-by: Hyungwon Hwang <redacted> Signed-off-by: Andrzej Hajda <redacted> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Hoegeun Kwon <redacted> Tested-by: Chanwoo Choi <cw00.choi@samsung.com> --- arch/arm64/boot/dts/exynos/exynos5433-tm2.dts | 12 ++++++++++++ 1 file changed, 12 insertions(+)diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts b/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts index dea0a6f..db3fed2 100644 --- a/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts +++ b/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts@@ -52,6 +52,18 @@ assigned-clock-rates = <250000000>, <400000000>; };
I would add a line here.
+&dsi {
+ panel@0 {
+ compatible = "samsung,s6e3ha2";
+ reg = <0>;
+ vdd3-supply = <&ldo27_reg>;
+ vci-supply = <&ldo28_reg>;
+ reset-gpios = <&gpg0 0 GPIO_ACTIVE_LOW>;
+ enable-gpios = <&gpf1 5 GPIO_ACTIVE_HIGH>;
+ te-gpios = <&gpf1 3 GPIO_ACTIVE_HIGH>;
+ };
+};
+Reviewed-by: Javier Martinez Canillas <redacted> Best regards, -- Javier Martinez Canillas Open Source Group Samsung Research America _______________________________________________ dri-devel mailing list dri-devel@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/dri-devel