On Sat, 11 Feb 2017 22:01:29 +0000
James Hogan [off-list ref] wrote:

Hi Alban,

On Sun, Feb 05, 2017 at 08:52:32PM +0100, Alban wrote:

quoted

From: Alban Bedel <redacted>

The binding for the USB PHY went thru before the driver. However the
new version of the driver now use the PHY core support for reset, and
this expect the reset to be named "phy". So remove the "usb-" prefix
from the the reset names.

Signed-off-by: Alban Bedel <redacted>
---
 Documentation/devicetree/bindings/phy/phy-ath79-usb.txt | 4 ++--
 arch/mips/boot/dts/qca/ar9132.dtsi                      | 2 +-  

<snip>

quoted

diff --git a/arch/mips/boot/dts/qca/ar9132.dtsi b/arch/mips/boot/dts/qca/ar9132.dtsi
index 302f0a8..808c2bb 100644
--- a/arch/mips/boot/dts/qca/ar9132.dtsi
+++ b/arch/mips/boot/dts/qca/ar9132.dtsi

@@ -160,7 +160,7 @@
 	usb_phy: usb-phy {
 		compatible = "qca,ar7100-usb-phy";
 
-		reset-names = "usb-phy", "usb-suspend-override";
+		reset-names = "phy", "suspend-override";  

Does arch/mips/boot/dts/qca/ar9331.dtsi need updating too?

Right, I forgot the AR9331 had been added since then, I'll send a new
series.

Alban