[PATCH v4 3/3] MIPS: ath79: Fix the USB PHY reset names
From: Alban <albeu@free.fr>
Date: 2017-02-05 19:54:18
Also in:
linux-mips, lkml
Subsystem:
generic phy framework, mips, open firmware and flattened device tree bindings, the rest · Maintainers:
Vinod Koul, Thomas Bogendoerfer, Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds
From: Alban Bedel <albeu@free.fr> The binding for the USB PHY went thru before the driver. However the new version of the driver now use the PHY core support for reset, and this expect the reset to be named "phy". So remove the "usb-" prefix from the the reset names. Signed-off-by: Alban Bedel <albeu@free.fr> --- Documentation/devicetree/bindings/phy/phy-ath79-usb.txt | 4 ++-- arch/mips/boot/dts/qca/ar9132.dtsi | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-)
diff --git a/Documentation/devicetree/bindings/phy/phy-ath79-usb.txt b/Documentation/devicetree/bindings/phy/phy-ath79-usb.txt
index cafe219..c3a29c5 100644
--- a/Documentation/devicetree/bindings/phy/phy-ath79-usb.txt
+++ b/Documentation/devicetree/bindings/phy/phy-ath79-usb.txt@@ -3,7 +3,7 @@ Required properties: - compatible: "qca,ar7100-usb-phy" - #phys-cells: should be 0 -- reset-names: "usb-phy"[, "usb-suspend-override"] +- reset-names: "phy"[, "suspend-override"] - resets: references to the reset controllers Example:
@@ -11,7 +11,7 @@ Example: usb-phy { compatible = "qca,ar7100-usb-phy"; - reset-names = "usb-phy", "usb-suspend-override"; + reset-names = "phy", "suspend-override"; resets = <&rst 4>, <&rst 3>; #phy-cells = <0>;
diff --git a/arch/mips/boot/dts/qca/ar9132.dtsi b/arch/mips/boot/dts/qca/ar9132.dtsi
index 302f0a8..808c2bb 100644
--- a/arch/mips/boot/dts/qca/ar9132.dtsi
+++ b/arch/mips/boot/dts/qca/ar9132.dtsi@@ -160,7 +160,7 @@ usb_phy: usb-phy { compatible = "qca,ar7100-usb-phy"; - reset-names = "usb-phy", "usb-suspend-override"; + reset-names = "phy", "suspend-override"; resets = <&rst 4>, <&rst 3>; #phy-cells = <0>;
--
2.7.4