From: Shawn Guo [mailto:shawnguo@kernel.org]

On Tue, Dec 27, 2016 at 05:47:38PM +0800, Bai Ping wrote:

quoted

The i.MX 6SoloLiteLite application processors are NXP's latest
additions to a growing family of multimedia-focused products offering
high-performance processing optimized for lowest power consumption.
The i.MX 6SoloLiteLite processors feature NXP's advanced
implementation of the ARM Cortex-A9 core, which can be interfaced with
LPDDR3 and LPDDR2 DRAM memory devices.

i.MX6SLL is a new SOC of the i.MX6 family, shares many common modules,
so most of the MSL code can be resued from i.MX6 serious SOC.


change for V2:
    -  address comments in dts and dtsi from Fabio.
    -  split the doc update into two patch, fix typo.
    -  address comments in clock driver, add necessary 'const'qualifier.

Bai Ping (12):
  ARM: imx: Add basic msl support for imx6sll
  driver: clocksource: add gpt timer for imx6sll
  Document: dt: binding: imx: update clock doc for imx6sll
  driver: clk: imx: Add clock driver for imx6sll
  Document: dt: binding: imx: update pinctrl doc for imx6sll
  driver: pinctrl: imx: Add pinctrl driver support for imx6sll
  ARM: dts: imx: Add basic dtsi for imx6sll
  ARM: dts: imx: Add imx6sll EVK board dts support
  ARM: debug: Add low level debug support for imx6sll
  ARM: imx: Add suspend/resume support for imx6sll
  ARM: imx: correct i.mx6sll dram io low power mode
  ARM: configs: enable imx6sll support in defconfig

I do not think you need to necessarily put them into a series, since they will go
through different sub-system maintainers.  If there are dependencies
between them, you should manage to get the prerequisite parts get merged
first.

ok, got it. 

Shawn