[PATCH v2 03/12] Document: dt: binding: imx: update clock doc for imx6sll
From: Bai Ping <ping.bai@nxp.com>
Date: 2016-12-27 09:47:41
Also in:
linux-arm-kernel, linux-clk, linux-gpio
Subsystem:
common clk framework, nxp i.mx clock drivers, open firmware and flattened device tree bindings, the rest · Maintainers:
Michael Turquette, Stephen Boyd, Abel Vesa, Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds
Add clock binding doc uppdate for imx6sll. Signed-off-by: Bai Ping <ping.bai@nxp.com> --- .../devicetree/bindings/clock/imx6sll-clock.txt | 37 ++++++++++++++++++++++ 1 file changed, 37 insertions(+) create mode 100644 Documentation/devicetree/bindings/clock/imx6sll-clock.txt
diff --git a/Documentation/devicetree/bindings/clock/imx6sll-clock.txt b/Documentation/devicetree/bindings/clock/imx6sll-clock.txt
new file mode 100644
index 0000000..3a46787
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/imx6sll-clock.txt@@ -0,0 +1,37 @@ +* Clock bindings for Freescale i.MX6 SLL + +Required properties: +- compatible: Should be "fsl,imx6sll-ccm" +- reg: Address and length of the register set +- #clock-cells: Should be <1> +- clocks: list of clock specifiers, must contain an entry for each required + entry in clock-names +- clock-names: should include entries "ckil", "osc", "ipp_di0" and "ipp_di1" + +The clock consumer should specify the desired clock by having the clock +ID in its "clocks" phandle cell. See include/dt-bindings/clock/imx6sll-clock.h +for the full list of i.MX6 SLL clock IDs. + +Examples: + +#include <dt-bindings/clock/imx6sll-clock.h> + +clks: ccm@020c4000 { + compatible = "fsl,imx6sll-ccm"; + reg = <0x020c4000 0x4000>; + interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>; + #clock-cells = <1>; + clocks = <&ckil>, <&osc>, <&ipp_di0>, <&ipp_di1>; + clock-names = "ckil", "osc", "ipp_di0", "ipp_di1"; +}; + +uart1: serial@02020000 { + compatible = "fsl,imx6sl-uart", "fsl,imx6q-uart", "fsl,imx21-uart"; + reg = <0x02020000 0x4000>; + interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SLL_CLK_UART1_IPG>, + <&clks IMX6SLL_CLK_UART1_SERIAL>; + clock-names = "ipg", "per"; + status = "disabled"; +};
--
1.9.1