Re: [PATCH linux v1 4/4] arm: dts: Add dt-binding to support seven segment display on zaius
From: Joel Stanley <hidden>
Date: 2016-12-14 09:02:42
Also in:
linux-arm-kernel, lkml, openbmc
Hello Jagha, On Wed, Dec 14, 2016 at 6:25 PM, Jaghathiswari Rankappagounder Natarajan [off-list ref] wrote:
Add clock, data and clear signal GPIO lines to control seven segment display on zaius platform. Signed-off-by: Jaghathiswari Rankappagounder Natarajan <redacted>
The Zaius device tree is not upstream. I suggest you submit it through the Aspeed maintainer's tree (me!) for inclusion in the next merge window. For the time being, drop this patch from your series as it will not apply to the upstream kernel. As a general rule make sure you're basing the patches you send upstream on a tag from an upstream tree. Linus' v4.9 tag would be the best one at this point in time. Cheers, Joel
quoted hunk ↗ jump to hunk
--- arch/arm/boot/dts/aspeed-bmc-opp-zaius.dts | 8 ++++++++ 1 file changed, 8 insertions(+)diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-zaius.dts b/arch/arm/boot/dts/aspeed-bmc-opp-zaius.dts index 8ef4ece..ccb8147 100644 --- a/arch/arm/boot/dts/aspeed-bmc-opp-zaius.dts +++ b/arch/arm/boot/dts/aspeed-bmc-opp-zaius.dts@@ -43,6 +43,14 @@ gpios = <&gpio ASPEED_GPIO(H, 7) GPIO_ACTIVE_LOW>; }; }; + + seven-seg-disp { + compatible = "seven-seg-gpio-dev"; + refresh-interval-ms = "1000"; + clock-gpios = <&gpio ASPEED_GPIO(J, 0) GPIO_ACTIVE_HIGH>; + data-gpios = <&gpio ASPEED_GPIO(J, 2) GPIO_ACTIVE_HIGH>; + clear-gpios = <&gpio ASPEED_GPIO(J, 1) GPIO_ACTIVE_HIGH>; + }; }; &fmc { --2.8.0.rc3.226.g39d4020
-- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html