[PATCH net-next v3 3/4] dt: bindings: add ethernet phy eee-broken-modes option documentation
From: Jerome Brunet <jbrunet@baylibre.com>
Date: 2016-11-28 09:47:49
Also in:
linux-amlogic, linux-arm-kernel, lkml, netdev
Subsystem:
networking drivers, open firmware and flattened device tree bindings, the rest · Maintainers:
Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> --- Documentation/devicetree/bindings/net/phy.txt | 2 ++ 1 file changed, 2 insertions(+)
diff --git a/Documentation/devicetree/bindings/net/phy.txt b/Documentation/devicetree/bindings/net/phy.txt
index 4627da3d52c4..54749b60a466 100644
--- a/Documentation/devicetree/bindings/net/phy.txt
+++ b/Documentation/devicetree/bindings/net/phy.txt@@ -38,6 +38,8 @@ Optional Properties: - enet-phy-lane-swap: If set, indicates the PHY will swap the TX/RX lanes to compensate for the board being designed with the lanes swapped. +- eee-broken-modes: Bits to clear in the MDIO_AN_EEE_ADV register to + disable EEE broken modes. Example:
--
2.7.4