Kevin Hilman [off-list ref] writes:

Martin Blumenstingl [off-list ref] writes:

quoted

From: Jerome Brunet <jbrunet-rdvid1DuHRBWk0Htik3J/w@public.gmane.org>

Enable both gxbb USB controller and add a 5V regulator for the OTG port
VBUS

Signed-off-by: Jerome Brunet <jbrunet-rdvid1DuHRBWk0Htik3J/w@public.gmane.org>

nit: subject should have "ARM64: dts:" prefix.

quoted

---
 arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi | 29 ++++++++++++++++++++++++
 1 file changed, 29 insertions(+)

diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi
index ce105fe..4493bce 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi

@@ -93,6 +93,18 @@
 		compatible = "mmc-pwrseq-emmc";
 		reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>;
 	};
+
+	usb_vbus: regulator-usb0-vbus {

nit: I like to use the signal name from the schematics for the node name
(and for regulator-name below).  In the schematics, that signal is named
USB_PWR.

quoted

+		compatible = "regulator-fixed";
+
+		regulator-name = "USB0_VBUS";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+
+		gpio = <&gpio GPIODV_24 GPIO_ACTIVE_HIGH>;

Please add a comment above this line with the schematic signal name: USB_PWR_EN.

For the record... after a chat with Martin on IRC, I just fixed these up
myself locally, so...

Applied,

Kevin
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html