[PATCH 3/4] clk: tegra: Correct bit width for PMC output clock mux

The bit field for setting the clock mux for the PMC output clocks is a
2-bit field and has always been a 2-bit field for all Tegra devices that
have these clocks (starting with Tegra30). However, the PMC clock driver
incorrectly specifies that this bit field is 3 bits wide and this causes
other bits in the register to be over-written when setting up the mux.
Therefore, correct the width for PMC clock mux to prevent over-writing
other fields.

Signed-off-by: Jon Hunter <redacted>
---

I did not bother marking this for stable because it has been around for
such a long time I don't think that this has caused any problems. I only
stumbled across this when dumping the register contents during some
testing. Nonetheless we should correct this.

 drivers/clk/tegra/clk-tegra-pmc.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/clk/tegra/clk-tegra-pmc.c b/drivers/clk/tegra/clk-tegra-pmc.c
index 91377abfefa1..36469a2ca385 100644
--- a/drivers/clk/tegra/clk-tegra-pmc.c
+++ b/drivers/clk/tegra/clk-tegra-pmc.c

@@ -97,7 +97,7 @@ void __init tegra_pmc_clk_init(void __iomem *pmc_base,
 		clk = clk_register_mux(NULL, data->mux_name, data->parents,
 				data->num_parents, CLK_SET_RATE_NO_REPARENT,
 				pmc_base + PMC_CLK_OUT_CNTRL, data->mux_shift,
-				3, 0, &clk_out_lock);
+				2, 0, &clk_out_lock);
 		*dt_clk = clk;
 
 

-- 
2.1.4