Thread (5 messages) 5 messages, 5 authors, 2016-07-12

Re: [PATCH v3 6/7] spi: s3c64xx: restore removed comments

From: Michael Turquette <mturquette@baylibre.com>
Date: 2016-07-12 18:07:53
Also in: linux-arm-kernel, linux-clk, linux-samsung-soc, linux-spi

Possibly related (same subject, not in this thread)

Quoting Andi Shyti (2016-07-11 23:54:04)
Patch a9e93e8 has erroneously removed some comments which are
important to understand why the bus frequency is multiplied by
two during the spi transfer.

Reword the previous comment to a more appropriate message.

Suggested-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Andi Shyti <redacted>
Reviewed-by: Michael Turquette <mturquette@baylibre.com>
---
Hi,

despite Mike's comments I'm sending the patch as it was
originally meant. I think that fixing the exact clk where to set
the rate should anyway go in a different patch.
That sounds fair.

Regards,
Mike
quoted hunk ↗ jump to hunk
V2->V3
The comment has been reworded as Sylwester recommended.

Thanks,
Andi

 drivers/spi/spi-s3c64xx.c | 1 +
 1 file changed, 1 insertion(+)
diff --git a/drivers/spi/spi-s3c64xx.c b/drivers/spi/spi-s3c64xx.c
index 6da663f..5bedafc 100644
--- a/drivers/spi/spi-s3c64xx.c
+++ b/drivers/spi/spi-s3c64xx.c
@@ -639,6 +639,7 @@ static void s3c64xx_spi_config(struct s3c64xx_spi_driver_data *sdd)
        writel(val, regs + S3C64XX_SPI_MODE_CFG);
 
        if (sdd->port_conf->clk_from_cmu) {
+               /* The src_clk clock is divided internally by 2 */
                clk_set_rate(sdd->src_clk, sdd->cur_speed * 2);
        } else {
                /* Configure Clock */
-- 
2.8.1
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help