[PATCH 11/16] arm64: dts: msm8996: add support to blsp1_spi0 pinctrl
From: Srinivas Kandagatla <hidden>
Date: 2016-06-17 15:16:28
Also in:
linux-arm-kernel, linux-arm-msm, lkml
Subsystem:
arm/qualcomm mailing list, arm/qualcomm support, the rest · Maintainers:
Bjorn Andersson, Konrad Dybcio, Linus Torvalds
This patch adds pinctrl nodes required for blsp1_spi0. Signed-off-by: Srinivas Kandagatla <redacted> --- arch/arm64/boot/dts/qcom/msm8996-pins.dtsi | 34 ++++++++++++++++++++++++++++++ 1 file changed, 34 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/msm8996-pins.dtsi b/arch/arm64/boot/dts/qcom/msm8996-pins.dtsi
index 79ed98c..9fd37a0 100644
--- a/arch/arm64/boot/dts/qcom/msm8996-pins.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8996-pins.dtsi@@ -13,6 +13,40 @@ &msmgpio { + blsp1_spi0_default: blsp1_spi0_default { + pinmux { + function = "blsp_spi1"; + pins = "gpio0", "gpio1", "gpio3"; + }; + pinmux_cs { + function = "gpio"; + pins = "gpio2"; + }; + pinconf { + pins = "gpio0", "gpio1", "gpio3"; + drive-strength = <12>; + bias-disable; + }; + pinconf_cs { + pins = "gpio2"; + drive-strength = <16>; + bias-disable; + output-high; + }; + }; + + blsp1_spi0_sleep: blsp1_spi0_sleep { + pinmux { + function = "gpio"; + pins = "gpio0", "gpio1", "gpio2", "gpio3"; + }; + pinconf { + pins = "gpio0", "gpio1", "gpio2", "gpio3"; + drive-strength = <2>; + bias-pull-down; + }; + }; + blsp1_i2c2_default: blsp1_i2c2_default { pinmux { function = "blsp_i2c3";
--
2.7.4